Audio Fix / setup help

Topping DX9: choose the already-enumerated DX9 computer output

Topping DX9 — choose the already-enumerated DX9 computer output. Use the stated exact hardware and connection scope.

Manufacturer-documented Reviewed 2026-11-09 · Revision 1

Follow these checks in Audio Fix →

When this guide applies

Exact Topping DX9. DX9 is already enumerated by the computer through a USB data cable; driver prerequisites are already satisfied. Front headphone output and USB input are selected but computer media is going elsewhere.

Connection scope: USB audio. Symptom: There is no playback sound.

This is a documented check, not a diagnosis of your equipment. The model name does not confirm the selected input, mode, software or connected partner.

If your exact model or a required setting is unknown, use the “I don’t know” branch below. Do not apply a similarly named model’s instructions.

Checks and possible outcomes

Start at scope. Follow the link that matches what you actually observe. Alternative branches are not a single sequence of actions.

scope

Confirm the model and connection

DX9 is already enumerated by the computer through a USB data cable; driver prerequisites are already satisfied. Front headphone output and USB input are selected but computer media is going elsewhere.

Look for: Confirm this exact setup and observation before continuing.

  • Manufacturer-documented Topping DX9 — official manual english ↗English PDF pages20–26: remote, operation and normal menu — DX9 has independent HPA, Line Out and PRE outputs. Out mode HPA selects front headphones; HPA output selects6.35/4.4/XLR. A long remote Line Out press enters BT pairing, unlike brightness. Normal menu provides Gain and Advanced Channel balance; brightness and standby have separate controls. USB troubleshooting names computer output selection.Exact Topping DX9. · Source checked 2026-11-09

a1

Inspect system and player output

With DX9 powered, USB selected and headphones already active, inspect computer/player routing.

Look for: Observe the named indication or available control; stop if absent.

  • Manufacturer-documented Topping DX9 — official manual english ↗English PDF pages20–26: remote, operation and normal menu — DX9 has independent HPA, Line Out and PRE outputs. Out mode HPA selects front headphones; HPA output selects6.35/4.4/XLR. A long remote Line Out press enters BT pairing, unlike brightness. Normal menu provides Gain and Advanced Channel balance; brightness and standby have separate controls. USB troubleshooting names computer output selection.Exact Topping DX9. · Source checked 2026-11-09

a2

Select the exact DX9

Choose the enumerated DX9 as output in the system and player. Stop if absent rather than installing arbitrary drivers.

Look for: Observe the named indication or available control; stop if absent.

  • Manufacturer-documented Topping DX9 — official manual english ↗English PDF pages20–26: remote, operation and normal menu — DX9 has independent HPA, Line Out and PRE outputs. Out mode HPA selects front headphones; HPA output selects6.35/4.4/XLR. A long remote Line Out press enters BT pairing, unlike brightness. Normal menu provides Gain and Advanced Channel balance; brightness and standby have separate controls. USB troubleshooting names computer output selection.Exact Topping DX9. · Source checked 2026-11-09

a3

Compare quiet PCM media

Play familiar PCM media with headphone volume low and rear outputs unused.

Look for: Observe the named indication or available control; stop if absent.

  • Manufacturer-documented Topping DX9 — official manual english ↗English PDF pages20–26: remote, operation and normal menu — DX9 has independent HPA, Line Out and PRE outputs. Out mode HPA selects front headphones; HPA output selects6.35/4.4/XLR. A long remote Line Out press enters BT pairing, unlike brightness. Normal menu provides Gain and Advanced Channel balance; brightness and standby have separate controls. USB troubleshooting names computer output selection.Exact Topping DX9. · Source checked 2026-11-09

observe

Check the result

Does selecting DX9 route the intended quiet computer media to headphones?

Look for: Confirm this exact setup and observation before continuing.

  • Manufacturer-documented Topping DX9 — official manual english ↗English PDF pages20–26: remote, operation and normal menu — DX9 has independent HPA, Line Out and PRE outputs. Out mode HPA selects front headphones; HPA output selects6.35/4.4/XLR. A long remote Line Out press enters BT pairing, unlike brightness. Normal menu provides Gain and Advanced Channel balance; brightness and standby have separate controls. USB troubleshooting names computer output selection.Exact Topping DX9. · Source checked 2026-11-09

Possible result

More information is required

An unknown state is not a diagnosis. Record the last visible indication and consult the exact model instructions.

insufficient data

Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

    Possible result

    Continue with source and model support

    Keep the source, connection and last observation. Do not reset, open equipment or change full-scale output to compensate for an unconfirmed result.

    next support

    Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

      Possible result

      Checks completed

      The requested observation was confirmed in this setup. It does not establish a hardware repair or guarantee another source behaves the same.

      steps completed

      Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

        All Audio Fix guides → · TV & Audio Finder →

        Scroll to Top