Audio Fix / setup help
SSL 2 MKII: record the hardware channel rather than an unrelated DAW input
SSL 2 MKII: record the hardware channel rather than an unrelated DAW input. Check prerequisites and the actual response before reporting an outcome.
Manufacturer-documented Reviewed 2026-11-09 · Revision 1
Follow these checks in Audio Fix →When this guide applies
Hardware input meter active and compatible host/driver already established.
Connection scope: USB audio. Symptom: Recording or direct monitoring is not working.
This is a documented check, not a diagnosis of your equipment. The model name does not confirm the selected input, mode, software or connected partner.
If your exact model or a required setting is unknown, use the “I don’t know” branch below. Do not apply a similarly named model’s instructions.
Checks and possible outcomes
Start at step-0. Follow the link that matches what you actually observe. Alternative branches are not a single sequence of actions.
step-0
Does the intended hardware channel already show a useful signal?
Direct listening and hardware metering do not prove DAW input assignment.
Look for: Confirm the actual prerequisite or observation. Unknown stops safely.
- If Yes / check completed → Is this exact SSL interface already the DAW audio device?
- If No / cannot confirm → Keep these observations for official support
- If I do not know / cannot check → A required fact is unknown
- Manufacturer-documented SSL 2 MKII official user guide ↗PDF pages 28 — Select the interface as DAW audio device, assign track input 1/channel 1 or input 2/channel 2 and record-arm the intended track.Exact model/generation named in this manual; external controls and documented host paths only. · Source checked 2026-11-09
step-1
Is this exact SSL interface already the DAW audio device?
Unknown/absent device needs its official host setup first.
Look for: Confirm the actual prerequisite or observation. Unknown stops safely.
- If Yes / check completed → May the stopped track input and record-arm state change?
- If No / cannot confirm → Keep these observations for official support
- If I do not know / cannot check → A required fact is unknown
- Manufacturer-documented SSL 2 MKII official user guide ↗PDF pages 28 — Select the interface as DAW audio device, assign track input 1/channel 1 or input 2/channel 2 and record-arm the intended track.Exact model/generation named in this manual; external controls and documented host paths only. · Source checked 2026-11-09
step-2
May the stopped track input and record-arm state change?
Preserve the old assignment and other live tracks.
Look for: Confirm the actual prerequisite or observation. Unknown stops safely.
- If Yes / check completed → Assign the track input to its actual channel number
- If No / cannot confirm → Keep these observations for official support
- If I do not know / cannot check → A required fact is unknown
- Manufacturer-documented SSL 2 MKII official user guide ↗PDF pages 28 — Select the interface as DAW audio device, assign track input 1/channel 1 or input 2/channel 2 and record-arm the intended track.Exact model/generation named in this manual; external controls and documented host paths only. · Source checked 2026-11-09
step-3
Assign the track input to its actual channel number
Channel 1 is input 1 and channel 2 is input 2. Use a mono track for a lone mono source.
Look for: Perform only the stated operation, then confirm whether it could be completed.
- If Yes / check completed → Record-arm only the intended track
- If No / cannot confirm → Keep these observations for official support
- If I do not know / cannot check → A required fact is unknown
- Manufacturer-documented SSL 2 MKII official user guide ↗PDF pages 28 — Select the interface as DAW audio device, assign track input 1/channel 1 or input 2/channel 2 and record-arm the intended track.Exact model/generation named in this manual; external controls and documented host paths only. · Source checked 2026-11-09
step-4
Record-arm only the intended track
Avoid starting capture or broadcasting unintentionally.
Look for: Perform only the stated operation, then confirm whether it could be completed.
- If Yes / check completed → Does that armed track meter show the known input?
- If No / cannot confirm → Keep these observations for official support
- If I do not know / cannot check → A required fact is unknown
- Manufacturer-documented SSL 2 MKII official user guide ↗PDF pages 28 — Select the interface as DAW audio device, assign track input 1/channel 1 or input 2/channel 2 and record-arm the intended track.Exact model/generation named in this manual; external controls and documented host paths only. · Source checked 2026-11-09
step-5
Does that armed track meter show the known input?
No response is not permission to reset the driver or enable unsafe phantom power.
Look for: Confirm the actual prerequisite or observation. Unknown stops safely.
- If Yes / check completed → Checks completed — report what happened
- If No / cannot confirm → Keep these observations for official support
- If I do not know / cannot check → A required fact is unknown
- Manufacturer-documented SSL 2 MKII official user guide ↗PDF pages 28 — Select the interface as DAW audio device, assign track input 1/channel 1 or input 2/channel 2 and record-arm the intended track.Exact model/generation named in this manual; external controls and documented host paths only. · Source checked 2026-11-09
Possible result
Checks completed — report what happened
Completion is not an automatic solved result. Report solved, partly helped, did not help or could not follow based on your actual observation. No Audio Review physical test is claimed.
steps completed
Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.
Possible result
Keep these observations for official support
A required prerequisite or response was not confirmed. Stop this sequence and use the exact model and partner documentation. Do not escalate to a factory reset, firmware installation, internal repair or unsafe wiring change.
next support
Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.
Possible result
A required fact is unknown
Confirm the exact model, connection, partner capability and current control state before continuing. Do not guess settings or operate an updating product.
insufficient data
Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.