Audio Fix / setup help
RME Babyface Pro FS: open TotalMix rather than the driver Settings window
RME Babyface Pro FS: open TotalMix rather than the driver Settings window. Check prerequisites and the actual response before reporting an outcome.
Manufacturer-documented Reviewed 2026-11-09 · Revision 1
Follow these checks in Audio Fix →When this guide applies
Recognised interface and installed running Windows driver; mixer window not found.
Connection scope: USB audio. Symptom: The control app cannot find my device.
This is a documented check, not a diagnosis of your equipment. The model name does not confirm the selected input, mode, software or connected partner.
If your exact model or a required setting is unknown, use the “I don’t know” branch below. Do not apply a similarly named model’s instructions.
Checks and possible outcomes
Start at step-0. Follow the link that matches what you actually observe. Alternative branches are not a single sequence of actions.
step-0
Is the interface recognised with the installed Windows driver running?
A missing host device is different from a hidden mixer window.
Look for: Confirm the actual prerequisite or observation. Unknown stops safely.
- If Yes / check completed → Is the FX taskbar-notification icon visible for this driver?
- If No / cannot confirm → Keep these observations for official support
- If I do not know / cannot check → A required fact is unknown
- Manufacturer-documented RME Babyface Pro FS official user guide ↗PDF pages 16, 17 — On Windows, fire taskbar icon opens Settings and FX icon opens TotalMix. About displays installed driver/firmware. Optical Out selects ADAT/SPDIF; Input Status distinguishes No Lock/Lock/Sync.Exact model/generation named in this manual; external controls and documented host paths only. · Source checked 2026-11-09
step-1
Is the FX taskbar-notification icon visible for this driver?
Do not install an unrelated utility or collect private system information.
Look for: Confirm the actual prerequisite or observation. Unknown stops safely.
- If Yes / check completed → Click the FX icon to open TotalMix
- If No / cannot confirm → Keep these observations for official support
- If I do not know / cannot check → A required fact is unknown
- Manufacturer-documented RME Babyface Pro FS official user guide ↗PDF pages 16, 17 — On Windows, fire taskbar icon opens Settings and FX icon opens TotalMix. About displays installed driver/firmware. Optical Out selects ADAT/SPDIF; Input Status distinguishes No Lock/Lock/Sync.Exact model/generation named in this manual; external controls and documented host paths only. · Source checked 2026-11-09
step-2
Click the FX icon to open TotalMix
The fire icon opens Settings instead; do not launch a firmware utility.
Look for: Perform only the stated operation, then confirm whether it could be completed.
- If Yes / check completed → Does TotalMix display the intended Babyface Pro FS?
- If No / cannot confirm → Keep these observations for official support
- If I do not know / cannot check → A required fact is unknown
- Manufacturer-documented RME Babyface Pro FS official user guide ↗PDF pages 16, 17 — On Windows, fire taskbar icon opens Settings and FX icon opens TotalMix. About displays installed driver/firmware. Optical Out selects ADAT/SPDIF; Input Status distinguishes No Lock/Lock/Sync.Exact model/generation named in this manual; external controls and documented host paths only. · Source checked 2026-11-09
step-3
Does TotalMix display the intended Babyface Pro FS?
App discovery is not proof of an audible route or completed recording.
Look for: Confirm the actual prerequisite or observation. Unknown stops safely.
- If Yes / check completed → Checks completed — report what happened
- If No / cannot confirm → Keep these observations for official support
- If I do not know / cannot check → A required fact is unknown
- Manufacturer-documented RME Babyface Pro FS official user guide ↗PDF pages 16, 17 — On Windows, fire taskbar icon opens Settings and FX icon opens TotalMix. About displays installed driver/firmware. Optical Out selects ADAT/SPDIF; Input Status distinguishes No Lock/Lock/Sync.Exact model/generation named in this manual; external controls and documented host paths only. · Source checked 2026-11-09
Possible result
Checks completed — report what happened
Completion is not an automatic solved result. Report solved, partly helped, did not help or could not follow based on your actual observation. No Audio Review physical test is claimed.
steps completed
Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.
Possible result
Keep these observations for official support
A required prerequisite or response was not confirmed. Stop this sequence and use the exact model and partner documentation. Do not escalate to a factory reset, firmware installation, internal repair or unsafe wiring change.
next support
Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.
Possible result
A required fact is unknown
Confirm the exact model, connection, partner capability and current control state before continuing. Do not guess settings or operate an updating product.
insufficient data
Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.