Audio Fix / setup help

Pro-Ject Debut PRO B: check the documented factory-cartridge pressure with its gauge

Pro-Ject Debut PRO B — check the documented factory-cartridge pressure with its gauge. Follow the exact documented route and keep the actual result.

Manufacturer-documented Reviewed 2026-11-09 · Revision 1

Follow these checks in Audio Fix →

When this guide applies

Exact Pro-Ject Debut PRO B. Only confirmed Pick it PRO Balanced at 2.0 g. No other cartridge force is inferred. Only normal external user controls; no mains modification, chassis opening, reset or firmware installation.

Connection scope: Turntable / phono audio. Symptom: The record skips or the tonearm will not track.

This is a documented check, not a diagnosis of your equipment. The model name does not confirm the selected input, mode, software or connected partner.

If your exact model or a required setting is unknown, use the “I don’t know” branch below. Do not apply a similarly named model’s instructions.

Checks and possible outcomes

Start at scope. Follow the link that matches what you actually observe. Alternative branches are not a single sequence of actions.

scope

Confirm the exact setup

The unchanged Pick it PRO Balanced at 2.0 g is positively identified, the original gauge and counterweight are present, the motor is off, the guard is already safely removed and you can handle the exposed stylus. You accept a careful force check; otherwise use a dealer.

Look for: Choose only a detail you can confirm.

  • Manufacturer-documented Pro-Ject Debut PRO B official user guide ↗pp.5–7 — Tracking force and anti-skating — Use the supplied pressure gauge at 20 mN only for the confirmed Pick it PRO Balanced cartridge. Slide the correct counterweight until the gauge is level, then install the anti-skating thread in the third groove and through the support hoop. Original counterweight no.58 is for 7–10.5 g cartridges.Exact Pro-Ject Debut PRO B. Cartridge, counterweight and belt variant must be known. No original non-B or non-EVO controller is substituted. · Source checked 2026-11-09

a1

Place the original pressure gauge on the stationary platter

Use only its identified 20 mN point for this confirmed cartridge.

Look for: Perform this one check and observe the actual response.

  • Manufacturer-documented Pro-Ject Debut PRO B official user guide ↗pp.5–7 — Tracking force and anti-skating — Use the supplied pressure gauge at 20 mN only for the confirmed Pick it PRO Balanced cartridge. Slide the correct counterweight until the gauge is level, then install the anti-skating thread in the third groove and through the support hoop. Original counterweight no.58 is for 7–10.5 g cartridges.Exact Pro-Ject Debut PRO B. Cartridge, counterweight and belt variant must be known. No original non-B or non-EVO controller is substituted. · Source checked 2026-11-09

a2

Lower the stylus carefully onto that marked gauge point

Use the cue lever. A level gauge indicates this documented force; lift immediately if positioning is uncertain.

Look for: Perform this one check and observe the actual response.

  • Manufacturer-documented Pro-Ject Debut PRO B official user guide ↗pp.5–7 — Tracking force and anti-skating — Use the supplied pressure gauge at 20 mN only for the confirmed Pick it PRO Balanced cartridge. Slide the correct counterweight until the gauge is level, then install the anti-skating thread in the third groove and through the support hoop. Original counterweight no.58 is for 7–10.5 g cartridges.Exact Pro-Ject Debut PRO B. Cartridge, counterweight and belt variant must be known. No original non-B or non-EVO controller is substituted. · Source checked 2026-11-09

a3

Keep the arm safe after the observation

If the gauge is not level, retain that observation for a dealer rather than playing with an unconfirmed force. Do not loosen or slide the weight blindly.

Look for: Perform this one check and observe the actual response.

  • Manufacturer-documented Pro-Ject Debut PRO B official user guide ↗pp.5–7 — Tracking force and anti-skating — Use the supplied pressure gauge at 20 mN only for the confirmed Pick it PRO Balanced cartridge. Slide the correct counterweight until the gauge is level, then install the anti-skating thread in the third groove and through the support hoop. Original counterweight no.58 is for 7–10.5 g cartridges.Exact Pro-Ject Debut PRO B. Cartridge, counterweight and belt variant must be known. No original non-B or non-EVO controller is substituted. · Source checked 2026-11-09

result

Check the actual result

Does the original gauge indicate the documented force for that confirmed cartridge?

Look for: Choose only a detail you can confirm.

  • Manufacturer-documented Pro-Ject Debut PRO B official user guide ↗pp.5–7 — Tracking force and anti-skating — Use the supplied pressure gauge at 20 mN only for the confirmed Pick it PRO Balanced cartridge. Slide the correct counterweight until the gauge is level, then install the anti-skating thread in the third groove and through the support hoop. Original counterweight no.58 is for 7–10.5 g cartridges.Exact Pro-Ject Debut PRO B. Cartridge, counterweight and belt variant must be known. No original non-B or non-EVO controller is substituted. · Source checked 2026-11-09

Possible result

Confirm the unknown detail first

Do not infer a source setting, installed cartridge, connector role, software state or partner capability. Obtain the exact documentation before continuing.

insufficient data

Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

    Possible result

    Keep the actual observation for support

    Record the exact model, source, input and last observed response. These checks do not diagnose a failed component. No reset, service work or blind update is prescribed.

    next support

    Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

      Possible result

      Checks completed — keep the observed result

      This records the observation in this particular setup, not a guaranteed cure, physical Audio Review test or measurement.

      steps completed

      Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

        All Audio Fix guides → · TV & Audio Finder →

        Scroll to Top