Audio Fix / setup help

Naim Mu-so 2nd Generation: Pair a compatible iPhone using the documented Bluetooth indication

Naim Mu-so 2nd Generation — Pair a compatible iPhone using the documented Bluetooth indication. Follow the exact documented route and keep the actual result.

Manufacturer-documented Reviewed 2026-11-09 · Revision 1

Follow these checks in Audio Fix →

When this guide applies

Exact Naim Mu-so 2nd Generation. The user can positively identify the product Bluetooth control; stop at the flashing indication, no blind long hold. Only normal external user controls; no mains modification, chassis opening, reset or firmware installation.

Connection scope: Bluetooth. Symptom: My devices won’t pair or reconnect.

This is a documented check, not a diagnosis of your equipment. The model name does not confirm the selected input, mode, software or connected partner.

If your exact model or a required setting is unknown, use the “I don’t know” branch below. Do not apply a similarly named model’s instructions.

Checks and possible outcomes

Start at scope. Follow the link that matches what you actually observe. Alternative branches are not a single sequence of actions.

scope

Confirm the exact setup

Is iPhone Bluetooth already enabled, and can you positively identify the Mu-so 2nd Generation Bluetooth control?

Look for: Choose only a detail you can confirm.

  • Manufacturer-documented Naim: Bluetooth pairing issues with Mu-so and iOS ↗First three pairing checks — For Mu-so 2nd Generation with iOS: enable phone Bluetooth, hold the product Bluetooth button until its indicator flashes, then select Mu-so in iOS Settings > Bluetooth.Only exact Mu-so 2nd Generation and iOS; no deletion, restart or firmware change. · Source checked 2026-11-09

a1

Enter the documented pairing state

Hold that identified Bluetooth control only until the indicator flashes, then release. If the control or indication is unclear, stop.

Look for: Perform this one check and observe the actual response.

  • Manufacturer-documented Naim: Bluetooth pairing issues with Mu-so and iOS ↗First three pairing checks — For Mu-so 2nd Generation with iOS: enable phone Bluetooth, hold the product Bluetooth button until its indicator flashes, then select Mu-so in iOS Settings > Bluetooth.Only exact Mu-so 2nd Generation and iOS; no deletion, restart or firmware change. · Source checked 2026-11-09

a2

Select Mu-so on the iPhone

Open iPhone Settings > Bluetooth and select the intended Mu-so entry.

Look for: Perform this one check and observe the actual response.

  • Manufacturer-documented Naim: Bluetooth pairing issues with Mu-so and iOS ↗First three pairing checks — For Mu-so 2nd Generation with iOS: enable phone Bluetooth, hold the product Bluetooth button until its indicator flashes, then select Mu-so in iOS Settings > Bluetooth.Only exact Mu-so 2nd Generation and iOS; no deletion, restart or firmware change. · Source checked 2026-11-09

result

Check the actual result

Does the iPhone show Mu-so as connected?

Look for: Choose only a detail you can confirm.

  • Manufacturer-documented Naim: Bluetooth pairing issues with Mu-so and iOS ↗First three pairing checks — For Mu-so 2nd Generation with iOS: enable phone Bluetooth, hold the product Bluetooth button until its indicator flashes, then select Mu-so in iOS Settings > Bluetooth.Only exact Mu-so 2nd Generation and iOS; no deletion, restart or firmware change. · Source checked 2026-11-09

Possible result

Confirm the unknown detail first

Do not infer a source setting, installed cartridge, connector role, software state or partner capability. Obtain the exact documentation before continuing.

insufficient data

Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

    Possible result

    Keep the actual observation for support

    Record the exact model, source, input and last observed response. These checks do not diagnose a failed component. No reset, service work or blind update is prescribed.

    next support

    Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

      Possible result

      Checks completed — keep the observed result

      This records the observation in this particular setup, not a guaranteed cure, physical Audio Review test or measurement.

      steps completed

      Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

        All Audio Fix guides → · TV & Audio Finder →

        Scroll to Top