Audio Fix / setup help

Integra DRX-5.4: allow an already working network app to wake the receiver

Integra DRX-5.4 — allow an already working network app to wake the receiver. Confirm the actual setup and observed response before reporting an outcome.

Manufacturer-documented Reviewed 2026-11-09 · Revision 1

Follow these checks in Audio Fix →

When this guide applies

Known app control works while receiver is awake; Network Standby is deliberately Off without overriding wake functions.

Connection scope: Wi-Fi / Ethernet network audio. Symptom: The control app cannot find my device.

This is a documented check, not a diagnosis of your equipment. The model name does not confirm the selected input, mode, software or connected partner.

If your exact model or a required setting is unknown, use the “I don’t know” branch below. Do not apply a similarly named model’s instructions.

Checks and possible outcomes

Start at step-0. Follow the link that matches what you actually observe. Alternative branches are not a single sequence of actions.

step-0

Does Integra Control Pro already control this exact receiver while it is awake?

Unknown app compatibility or a disconnected network needs its own setup.

Look for: Confirm the stated setup or observation. Unknown stops safely.

  • Manufacturer-documented Integra DRX-5.4 official manual ↗PDF pages 143 — Network Standby On permits network wake/control through Integra Control Pro while in standby and increases standby consumption. Other CEC/standby-through/USB/Bluetooth wake features can make the effective state On despite an Off setting.App works while awake on the known network, but cannot wake the receiver; not Wi-Fi setup or Bluetooth pairing. · Source checked 2026-11-09

step-1

Is Network Standby currently Off with no active CEC, HDMI Standby Through, USB standby-power or Bluetooth wake override?

Those features can make the effective state On regardless of the setting. Do not turn them off as part of this check.

Look for: Confirm the stated setup or observation. Unknown stops safely.

  • Manufacturer-documented Integra DRX-5.4 official manual ↗PDF pages 143 — Network Standby On permits network wake/control through Integra Control Pro while in standby and increases standby consumption. Other CEC/standby-through/USB/Bluetooth wake features can make the effective state On despite an Off setting.App works while awake on the known network, but cannot wake the receiver; not Wi-Fi setup or Bluetooth pairing. · Source checked 2026-11-09

step-2

Is the network connection still known available and no update active?

A lost network may disable network standby for power saving; do not guess its state.

Look for: Confirm the stated setup or observation. Unknown stops safely.

  • Manufacturer-documented Integra DRX-5.4 official manual ↗PDF pages 143 — Network Standby On permits network wake/control through Integra Control Pro while in standby and increases standby consumption. Other CEC/standby-through/USB/Bluetooth wake features can make the effective state On despite an Off setting.App works while awake on the known network, but cannot wake the receiver; not Wi-Fi setup or Bluetooth pairing. · Source checked 2026-11-09

step-3

Do you accept greater standby consumption to permit app wake/control?

This is an intentional convenience/power tradeoff, not a firmware cure.

Look for: Confirm the stated setup or observation. Unknown stops safely.

  • Manufacturer-documented Integra DRX-5.4 official manual ↗PDF pages 143 — Network Standby On permits network wake/control through Integra Control Pro while in standby and increases standby consumption. Other CEC/standby-through/USB/Bluetooth wake features can make the effective state On despite an Off setting.App works while awake on the known network, but cannot wake the receiver; not Wi-Fi setup or Bluetooth pairing. · Source checked 2026-11-09

step-4

Set Hardware > Power Management > Network Standby to On

Leave auto-standby timers, HDMI settings and network addresses unchanged.

Look for: Perform only the stated operation and confirm whether it was possible.

  • Manufacturer-documented Integra DRX-5.4 official manual ↗PDF pages 143 — Network Standby On permits network wake/control through Integra Control Pro while in standby and increases standby consumption. Other CEC/standby-through/USB/Bluetooth wake features can make the effective state On despite an Off setting.App works while awake on the known network, but cannot wake the receiver; not Wi-Fi setup or Bluetooth pairing. · Source checked 2026-11-09

step-5

May the receiver enter normal standby with all listening finished?

A standby test interrupts listening; do not perform it during recording or an update.

Look for: Confirm the stated setup or observation. Unknown stops safely.

  • Manufacturer-documented Integra DRX-5.4 official manual ↗PDF pages 143 — Network Standby On permits network wake/control through Integra Control Pro while in standby and increases standby consumption. Other CEC/standby-through/USB/Bluetooth wake features can make the effective state On despite an Off setting.App works while awake on the known network, but cannot wake the receiver; not Wi-Fi setup or Bluetooth pairing. · Source checked 2026-11-09

step-6

Put the receiver into normal standby using its documented power control

Do not disconnect mains or issue a factory reset.

Look for: Perform only the stated operation and confirm whether it was possible.

  • Manufacturer-documented Integra DRX-5.4 official manual ↗PDF pages 143 — Network Standby On permits network wake/control through Integra Control Pro while in standby and increases standby consumption. Other CEC/standby-through/USB/Bluetooth wake features can make the effective state On despite an Off setting.App works while awake on the known network, but cannot wake the receiver; not Wi-Fi setup or Bluetooth pairing. · Source checked 2026-11-09

step-7

Use the already verified app to request normal power on

Keep the same known local network connection.

Look for: Perform only the stated operation and confirm whether it was possible.

  • Manufacturer-documented Integra DRX-5.4 official manual ↗PDF pages 143 — Network Standby On permits network wake/control through Integra Control Pro while in standby and increases standby consumption. Other CEC/standby-through/USB/Bluetooth wake features can make the effective state On despite an Off setting.App works while awake on the known network, but cannot wake the receiver; not Wi-Fi setup or Bluetooth pairing. · Source checked 2026-11-09

step-8

Does the app wake the intended receiver?

A successful setting save alone is not a wake result.

Look for: Confirm the stated setup or observation. Unknown stops safely.

  • Manufacturer-documented Integra DRX-5.4 official manual ↗PDF pages 143 — Network Standby On permits network wake/control through Integra Control Pro while in standby and increases standby consumption. Other CEC/standby-through/USB/Bluetooth wake features can make the effective state On despite an Off setting.App works while awake on the known network, but cannot wake the receiver; not Wi-Fi setup or Bluetooth pairing. · Source checked 2026-11-09

Possible result

Checks completed — report what happened

Completion is not an automatic solved result. Report your actual outcome; no Audio Review physical test or measured repair is claimed.

steps completed

Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

    Possible result

    Stop and retain the actual observations

    A required fact or response was not confirmed. Consult the exact product/partner documentation or official support. Do not escalate to a reset, update installation, internal repair or unsafe wiring change.

    next support

    Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

      Possible result

      A required fact is unknown

      Confirm the actual model, source, partner capability and current state before continuing. Do not guess a menu or interrupt a live session/update.

      insufficient data

      Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

        All Audio Fix guides → · TV & Audio Finder →

        Scroll to Top