Audio Fix / setup help
FiiO BTR15: restore the first saved link after connecting source2
FiiO BTR15 — restore the first saved link after connecting source2. Use the stated exact hardware and connection scope.
Manufacturer-documented Reviewed 2026-11-09 · Revision 1
Follow these checks in Audio Fix →When this guide applies
Exact FiiO BTR15. Source1 was actively connected before source2 was added. Source2 is now connected and the first source remains saved but disconnected. No call is active and exactly these two sources are intended.
Connection scope: Bluetooth. Symptom: Switching between devices isn’t working.
This is a documented check, not a diagnosis of your equipment. The model name does not confirm the selected input, mode, software or connected partner.
If your exact model or a required setting is unknown, use the “I don’t know” branch below. Do not apply a similarly named model’s instructions.
Checks and possible outcomes
Start at scope. Follow the link that matches what you actually observe. Alternative branches are not a single sequence of actions.
scope
Confirm the model and connection
Source1 was actively connected before source2 was added. Source2 is now connected and the first source remains saved but disconnected. No call is active and exactly these two sources are intended.
Look for: Confirm this exact setup and observation before continuing.
- If Yes, I confirm → Check both source states
- If No / my setup differs → Continue with source and model support
- If I cannot confirm → More information is required
- Manufacturer-documented FiiO BTR15 — official restore first link ↗Two-device connection, first-source reconnection — After adding source2 the official procedure reconnects source1 from its saved FIIO BTR15 entry. Pairing a source and an active connection are separate states.Exact FiiO BTR15. · Source checked 2026-11-09
a1
Check both source states
Confirm source2 currently shows BTR15 Connected and source1 shows its already-paired saved entry rather than an active connection.
Look for: Observe the named indication or available control; stop if absent.
- If I completed this check → Reconnect only the saved source1 entry
- If I cannot complete this → Continue with source and model support
- If I cannot determine this → More information is required
- Manufacturer-documented FiiO BTR15 — official restore first link ↗Two-device connection, first-source reconnection — After adding source2 the official procedure reconnects source1 from its saved FIIO BTR15 entry. Pairing a source and an active connection are separate states.Exact FiiO BTR15. · Source checked 2026-11-09
a2
Reconnect only the saved source1 entry
On source1 select the saved FIIO BTR15 entry to reconnect it. Do not pair a third source or delete records.
Look for: Observe the named indication or available control; stop if absent.
- If I completed this check → Inspect both active statuses
- If I cannot complete this → Continue with source and model support
- If I cannot determine this → More information is required
- Manufacturer-documented FiiO BTR15 — official restore first link ↗Two-device connection, first-source reconnection — After adding source2 the official procedure reconnects source1 from its saved FIIO BTR15 entry. Pairing a source and an active connection are separate states.Exact FiiO BTR15. · Source checked 2026-11-09
a3
Inspect both active statuses
Check that the two intended sources now both show an active connection. Do not assume they can mix simultaneous media.
Look for: Observe the named indication or available control; stop if absent.
- If I completed this check → Check the result
- If I cannot complete this → Continue with source and model support
- If I cannot determine this → More information is required
- Manufacturer-documented FiiO BTR15 — official restore first link ↗Two-device connection, first-source reconnection — After adding source2 the official procedure reconnects source1 from its saved FIIO BTR15 entry. Pairing a source and an active connection are separate states.Exact FiiO BTR15. · Source checked 2026-11-09
observe
Check the result
Do both intended sources now show an active BTR15 connection?
Look for: Confirm this exact setup and observation before continuing.
- If Yes, I confirm → Checks completed
- If No / my setup differs → Continue with source and model support
- If I cannot confirm → More information is required
- Manufacturer-documented FiiO BTR15 — official restore first link ↗Two-device connection, first-source reconnection — After adding source2 the official procedure reconnects source1 from its saved FIIO BTR15 entry. Pairing a source and an active connection are separate states.Exact FiiO BTR15. · Source checked 2026-11-09
Possible result
More information is required
An unknown state is not a diagnosis. Record the last visible indication and consult the exact model instructions.
insufficient data
Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.
Possible result
Continue with source and model support
Keep the source, connection and last observation. Do not reset, open equipment or change full-scale output to compensate for an unconfirmed result.
next support
Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.
Possible result
Checks completed
The requested observation was confirmed in this setup. It does not establish a hardware repair or guarantee another source behaves the same.
steps completed
Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.