Audio Fix / setup help
Edifier R1280DBs: release the first Bluetooth source before another connects
Edifier R1280DBs: release the first Bluetooth source before another connects. Observe the actual response before reporting an outcome.
Manufacturer-documented Reviewed 2026-11-09 · Revision 1
Follow these checks in Audio Fix →When this guide applies
Both sources known; one Bluetooth audio source at a time.
Connection scope: Bluetooth. Symptom: Switching between devices isn’t working.
This is a documented check, not a diagnosis of your equipment. The model name does not confirm the selected input, mode, software or connected partner.
If your exact model or a required setting is unknown, use the “I don’t know” branch below. Do not apply a similarly named model’s instructions.
Checks and possible outcomes
Start at step-0. Follow the link that matches what you actually observe. Alternative branches are not a single sequence of actions.
step-0
Is another source currently connected?
Inspect this state rather than assume it.
Look for: Confirm the stated prerequisite or observation; unknown is not a fault diagnosis.
- If Yes / this check is completed → Do you accept stopping that playback connection?
- If No / this cannot be confirmed → Keep the observation for manufacturer support
- If I do not know / cannot check → A required observation is unknown
- Manufacturer-documented Edifier R1280DBs user manual edition 1.1 ↗English pp.4–11 — Bluetooth input is blue; other inputs do not accept Bluetooth. Select EDIFIER R1280DBs and use 0000 only if asked. Remote has brief transport, volume, power and Bluetooth selection; holding Bluetooth disconnects. Range is 10m; A2DP/AVRCP provide full functionality.Exact DBs suffix, not R1280DB; avoid ambiguous multifunction-knob holds. · Source checked 2026-11-09
- Manufacturer-documented Edifier Bluetooth source-count support ↗R1280DBs example — Only one Bluetooth audio source at a time; after the original disconnects the speaker becomes discoverable.Manufacturer explicitly names R1280DBs. · Source checked 2026-11-09
step-1
Do you accept stopping that playback connection?
Saved pairings remain; no Forget or factory reset.
Look for: Confirm the stated prerequisite or observation; unknown is not a fault diagnosis.
- If Yes / this check is completed → Disconnect these speakers on the first source
- If No / this cannot be confirmed → Keep the observation for manufacturer support
- If I do not know / cannot check → A required observation is unknown
- Manufacturer-documented Edifier R1280DBs user manual edition 1.1 ↗English pp.4–11 — Bluetooth input is blue; other inputs do not accept Bluetooth. Select EDIFIER R1280DBs and use 0000 only if asked. Remote has brief transport, volume, power and Bluetooth selection; holding Bluetooth disconnects. Range is 10m; A2DP/AVRCP provide full functionality.Exact DBs suffix, not R1280DB; avoid ambiguous multifunction-knob holds. · Source checked 2026-11-09
- Manufacturer-documented Edifier Bluetooth source-count support ↗R1280DBs example — Only one Bluetooth audio source at a time; after the original disconnects the speaker becomes discoverable.Manufacturer explicitly names R1280DBs. · Source checked 2026-11-09
step-2
Disconnect these speakers on the first source
Use its device details; avoid a speaker power-knob hold.
Look for: Perform only the stated check, then confirm whether it could be completed.
- If Yes / this check is completed → Connect the intended second source
- If No / this cannot be confirmed → Keep the observation for manufacturer support
- If I do not know / cannot check → A required observation is unknown
- Manufacturer-documented Edifier R1280DBs user manual edition 1.1 ↗English pp.4–11 — Bluetooth input is blue; other inputs do not accept Bluetooth. Select EDIFIER R1280DBs and use 0000 only if asked. Remote has brief transport, volume, power and Bluetooth selection; holding Bluetooth disconnects. Range is 10m; A2DP/AVRCP provide full functionality.Exact DBs suffix, not R1280DB; avoid ambiguous multifunction-knob holds. · Source checked 2026-11-09
- Manufacturer-documented Edifier Bluetooth source-count support ↗R1280DBs example — Only one Bluetooth audio source at a time; after the original disconnects the speaker becomes discoverable.Manufacturer explicitly names R1280DBs. · Source checked 2026-11-09
step-3
Connect the intended second source
Select its saved EDIFIER R1280DBs entry or the now-discoverable speaker.
Look for: Perform only the stated check, then confirm whether it could be completed.
- If Yes / this check is completed → Does the intended source show the live connection?
- If No / this cannot be confirmed → Keep the observation for manufacturer support
- If I do not know / cannot check → A required observation is unknown
- Manufacturer-documented Edifier R1280DBs user manual edition 1.1 ↗English pp.4–11 — Bluetooth input is blue; other inputs do not accept Bluetooth. Select EDIFIER R1280DBs and use 0000 only if asked. Remote has brief transport, volume, power and Bluetooth selection; holding Bluetooth disconnects. Range is 10m; A2DP/AVRCP provide full functionality.Exact DBs suffix, not R1280DB; avoid ambiguous multifunction-knob holds. · Source checked 2026-11-09
- Manufacturer-documented Edifier Bluetooth source-count support ↗R1280DBs example — Only one Bluetooth audio source at a time; after the original disconnects the speaker becomes discoverable.Manufacturer explicitly names R1280DBs. · Source checked 2026-11-09
step-4
Does the intended source show the live connection?
This is not simultaneous two-phone playback or stereo linking two speaker sets.
Look for: Confirm the stated prerequisite or observation; unknown is not a fault diagnosis.
- If Yes / this check is completed → Checks completed — report your outcome
- If No / this cannot be confirmed → Keep the observation for manufacturer support
- If I do not know / cannot check → A required observation is unknown
- Manufacturer-documented Edifier R1280DBs user manual edition 1.1 ↗English pp.4–11 — Bluetooth input is blue; other inputs do not accept Bluetooth. Select EDIFIER R1280DBs and use 0000 only if asked. Remote has brief transport, volume, power and Bluetooth selection; holding Bluetooth disconnects. Range is 10m; A2DP/AVRCP provide full functionality.Exact DBs suffix, not R1280DB; avoid ambiguous multifunction-knob holds. · Source checked 2026-11-09
- Manufacturer-documented Edifier Bluetooth source-count support ↗R1280DBs example — Only one Bluetooth audio source at a time; after the original disconnects the speaker becomes discoverable.Manufacturer explicitly names R1280DBs. · Source checked 2026-11-09
Possible result
Checks completed — report your outcome
Completion does not automatically mean solved. Report what actually happened: solved, partly helped, did not help or could not follow. No Audio Review physical test is claimed.
steps completed
Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.
Possible result
Keep the observation for manufacturer support
These steps did not establish a working setup. Keep the exact model, source, software and last observed response for support. No hardware or firmware defect is diagnosed.
next support
Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.
Possible result
A required observation is unknown
Confirm the exact model and linked instructions before continuing. Do not guess the state of a control, connection or update.
insufficient data
Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.