Audio Fix / setup help

Dynaudio Focus 10: handoff its single active Bluetooth connection

Dynaudio Focus 10: handoff its single active Bluetooth connection. Observe the actual response before reporting an outcome.

Manufacturer-documented Reviewed 2026-11-09 · Revision 1

Follow these checks in Audio Fix →

When this guide applies

Both sources already paired; no ten-second memory clearing.

Connection scope: Bluetooth. Symptom: Switching between devices isn’t working.

This is a documented check, not a diagnosis of your equipment. The model name does not confirm the selected input, mode, software or connected partner.

If your exact model or a required setting is unknown, use the “I don’t know” branch below. Do not apply a similarly named model’s instructions.

Checks and possible outcomes

Start at step-0. Follow the link that matches what you actually observe. Alternative branches are not a single sequence of actions.

step-0

Are both intended sources already paired?

The speakers store multiple devices but connect/play only one at a time.

Look for: Confirm the stated prerequisite or observation; unknown is not a fault diagnosis.

  • Manufacturer-documented Dynaudio Focus user manual ↗Focus 10 scope p.6; Bluetooth pp.17–18,24,27–28 — Three-second Bluetooth hold enters five-minute blue-flashing discovery. Ten stored devices, eleventh removes least recently active; only one live connection. Bluetooth input must be selected manually; changing input or standby disconnects. Network streams have priority.Focus 10, not older Focus XD. Rear Bluetooth ten-second hold deletes all pairings and is excluded. · Source checked 2026-11-09

step-1

Do you accept disconnecting the first source?

Its playback stops while saved pairing records remain.

Look for: Confirm the stated prerequisite or observation; unknown is not a fault diagnosis.

  • Manufacturer-documented Dynaudio Focus user manual ↗Focus 10 scope p.6; Bluetooth pp.17–18,24,27–28 — Three-second Bluetooth hold enters five-minute blue-flashing discovery. Ten stored devices, eleventh removes least recently active; only one live connection. Bluetooth input must be selected manually; changing input or standby disconnects. Network streams have priority.Focus 10, not older Focus XD. Rear Bluetooth ten-second hold deletes all pairings and is excluded. · Source checked 2026-11-09

step-2

Disconnect Focus on the first source

Use that source Bluetooth details, without Forget.

Look for: Perform only the stated check, then confirm whether it could be completed.

  • Manufacturer-documented Dynaudio Focus user manual ↗Focus 10 scope p.6; Bluetooth pp.17–18,24,27–28 — Three-second Bluetooth hold enters five-minute blue-flashing discovery. Ten stored devices, eleventh removes least recently active; only one live connection. Bluetooth input must be selected manually; changing input or standby disconnects. Network streams have priority.Focus 10, not older Focus XD. Rear Bluetooth ten-second hold deletes all pairings and is excluded. · Source checked 2026-11-09

step-3

Connect the existing Focus entry on the second source

Use the intended local pair.

Look for: Perform only the stated check, then confirm whether it could be completed.

  • Manufacturer-documented Dynaudio Focus user manual ↗Focus 10 scope p.6; Bluetooth pp.17–18,24,27–28 — Three-second Bluetooth hold enters five-minute blue-flashing discovery. Ten stored devices, eleventh removes least recently active; only one live connection. Bluetooth input must be selected manually; changing input or standby disconnects. Network streams have priority.Focus 10, not older Focus XD. Rear Bluetooth ten-second hold deletes all pairings and is excluded. · Source checked 2026-11-09

step-4

Does the second source show the live connection?

If not, preserve source and state observations; do not clear the full speaker memory.

Look for: Confirm the stated prerequisite or observation; unknown is not a fault diagnosis.

  • Manufacturer-documented Dynaudio Focus user manual ↗Focus 10 scope p.6; Bluetooth pp.17–18,24,27–28 — Three-second Bluetooth hold enters five-minute blue-flashing discovery. Ten stored devices, eleventh removes least recently active; only one live connection. Bluetooth input must be selected manually; changing input or standby disconnects. Network streams have priority.Focus 10, not older Focus XD. Rear Bluetooth ten-second hold deletes all pairings and is excluded. · Source checked 2026-11-09

Possible result

Checks completed — report your outcome

Completion does not automatically mean solved. Report what actually happened: solved, partly helped, did not help or could not follow. No Audio Review physical test is claimed.

steps completed

Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

    Possible result

    Keep the observation for manufacturer support

    These steps did not establish a working setup. Keep the exact model, source, software and last observed response for support. No hardware or firmware defect is diagnosed.

    next support

    Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

      Possible result

      A required observation is unknown

      Confirm the exact model and linked instructions before continuing. Do not guess the state of a control, connection or update.

      insufficient data

      Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

        All Audio Fix guides → · TV & Audio Finder →

        Scroll to Top