Dynaudio Focus 10: enter Bluetooth discovery without deleting pairings

step-0

Is playback idle and a new Bluetooth pairing intended?

Disconnect another live source deliberately before this flow.

Look for: Confirm the stated prerequisite or observation; unknown is not a fault diagnosis.

• If Yes / this check is completed → Is there room in memory, or is eviction of the least-active saved device acceptable?
• If No / this cannot be confirmed → Keep the observation for manufacturer support
• If I do not know / cannot check → A required observation is unknown

• Manufacturer-documented Dynaudio Focus user manual ↗Focus 10 scope p.6; Bluetooth pp.17–18,24,27–28 — Three-second Bluetooth hold enters five-minute blue-flashing discovery. Ten stored devices, eleventh removes least recently active; only one live connection. Bluetooth input must be selected manually; changing input or standby disconnects. Network streams have priority.Focus 10, not older Focus XD. Rear Bluetooth ten-second hold deletes all pairings and is excluded. · Source checked 2026-11-09

step-1

Is there room in memory, or is eviction of the least-active saved device acceptable?

An eleventh saved device removes the device inactive longest.

Look for: Confirm the stated prerequisite or observation; unknown is not a fault diagnosis.

• If Yes / this check is completed → Hold remote Bluetooth for three seconds
• If No / this cannot be confirmed → Keep the observation for manufacturer support
• If I do not know / cannot check → A required observation is unknown

• Manufacturer-documented Dynaudio Focus user manual ↗Focus 10 scope p.6; Bluetooth pp.17–18,24,27–28 — Three-second Bluetooth hold enters five-minute blue-flashing discovery. Ten stored devices, eleventh removes least recently active; only one live connection. Bluetooth input must be selected manually; changing input or standby disconnects. Network streams have priority.Focus 10, not older Focus XD. Rear Bluetooth ten-second hold deletes all pairings and is excluded. · Source checked 2026-11-09

step-2

Hold remote Bluetooth for three seconds

Both indicators flash blue; pairing mode lasts five minutes. Do not hold the rear Bluetooth button for ten seconds.

Look for: Perform only the stated check, then confirm whether it could be completed.

• If Yes / this check is completed → Select this Focus pair on the source
• If No / this cannot be confirmed → Keep the observation for manufacturer support
• If I do not know / cannot check → A required observation is unknown

• Manufacturer-documented Dynaudio Focus user manual ↗Focus 10 scope p.6; Bluetooth pp.17–18,24,27–28 — Three-second Bluetooth hold enters five-minute blue-flashing discovery. Ten stored devices, eleventh removes least recently active; only one live connection. Bluetooth input must be selected manually; changing input or standby disconnects. Network streams have priority.Focus 10, not older Focus XD. Rear Bluetooth ten-second hold deletes all pairings and is excluded. · Source checked 2026-11-09

step-3

Select this Focus pair on the source

Use its intended name in Bluetooth settings.

Look for: Perform only the stated check, then confirm whether it could be completed.

• If Yes / this check is completed → Does the source show the Focus pair connected?
• If No / this cannot be confirmed → Keep the observation for manufacturer support
• If I do not know / cannot check → A required observation is unknown

• Manufacturer-documented Dynaudio Focus user manual ↗Focus 10 scope p.6; Bluetooth pp.17–18,24,27–28 — Three-second Bluetooth hold enters five-minute blue-flashing discovery. Ten stored devices, eleventh removes least recently active; only one live connection. Bluetooth input must be selected manually; changing input or standby disconnects. Network streams have priority.Focus 10, not older Focus XD. Rear Bluetooth ten-second hold deletes all pairings and is excluded. · Source checked 2026-11-09

step-4

Does the source show the Focus pair connected?

Input selection for playback may still be needed separately.

Look for: Confirm the stated prerequisite or observation; unknown is not a fault diagnosis.

• If Yes / this check is completed → Checks completed — report your outcome
• If No / this cannot be confirmed → Keep the observation for manufacturer support
• If I do not know / cannot check → A required observation is unknown

• Manufacturer-documented Dynaudio Focus user manual ↗Focus 10 scope p.6; Bluetooth pp.17–18,24,27–28 — Three-second Bluetooth hold enters five-minute blue-flashing discovery. Ten stored devices, eleventh removes least recently active; only one live connection. Bluetooth input must be selected manually; changing input or standby disconnects. Network streams have priority.Focus 10, not older Focus XD. Rear Bluetooth ten-second hold deletes all pairings and is excluded. · Source checked 2026-11-09

Possible result

Checks completed — report your outcome

Completion does not automatically mean solved. Report what actually happened: solved, partly helped, did not help or could not follow. No Audio Review physical test is claimed.

steps completed

Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

Possible result

Keep the observation for manufacturer support

These steps did not establish a working setup. Keep the exact model, source, software and last observed response for support. No hardware or firmware defect is diagnosed.

next support

Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

Possible result

A required observation is unknown

Confirm the exact model and linked instructions before continuing. Do not guess the state of a control, connection or update.

insufficient data

Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.