Dynaudio Focus 10: select Bluetooth when a connected source does not take over

step-0

Is the intended Bluetooth source connected to Focus?

A saved record alone is insufficient.

Look for: Confirm the stated prerequisite or observation; unknown is not a fault diagnosis.

• If Yes / this check is completed → Is every network audio stream already stopped?
• If No / this cannot be confirmed → Keep the observation for manufacturer support
• If I do not know / cannot check → A required observation is unknown

• Manufacturer-documented Dynaudio Focus user manual ↗Focus 10 scope p.6; Bluetooth pp.17–18,24,27–28 — Three-second Bluetooth hold enters five-minute blue-flashing discovery. Ten stored devices, eleventh removes least recently active; only one live connection. Bluetooth input must be selected manually; changing input or standby disconnects. Network streams have priority.Focus 10, not older Focus XD. Rear Bluetooth ten-second hold deletes all pairings and is excluded. · Source checked 2026-11-09

step-1

Is every network audio stream already stopped?

Network audio has priority. Obtain consent and stop it separately rather than interrupt it silently here.

Look for: Confirm the stated prerequisite or observation; unknown is not a fault diagnosis.

• If Yes / this check is completed → Press remote Bluetooth briefly
• If No / this cannot be confirmed → Keep the observation for manufacturer support
• If I do not know / cannot check → A required observation is unknown

• Manufacturer-documented Dynaudio Focus user manual ↗Focus 10 scope p.6; Bluetooth pp.17–18,24,27–28 — Three-second Bluetooth hold enters five-minute blue-flashing discovery. Ten stored devices, eleventh removes least recently active; only one live connection. Bluetooth input must be selected manually; changing input or standby disconnects. Network streams have priority.Focus 10, not older Focus XD. Rear Bluetooth ten-second hold deletes all pairings and is excluded. · Source checked 2026-11-09

step-2

Press remote Bluetooth briefly

This selects Bluetooth input. A three-second hold instead requests discovery.

Look for: Perform only the stated check, then confirm whether it could be completed.

• If Yes / this check is completed → Start ordinary source media at a comfortable level
• If No / this cannot be confirmed → Keep the observation for manufacturer support
• If I do not know / cannot check → A required observation is unknown

• Manufacturer-documented Dynaudio Focus user manual ↗Focus 10 scope p.6; Bluetooth pp.17–18,24,27–28 — Three-second Bluetooth hold enters five-minute blue-flashing discovery. Ten stored devices, eleventh removes least recently active; only one live connection. Bluetooth input must be selected manually; changing input or standby disconnects. Network streams have priority.Focus 10, not older Focus XD. Rear Bluetooth ten-second hold deletes all pairings and is excluded. · Source checked 2026-11-09

step-3

Start ordinary source media at a comfortable level

The manual says Bluetooth input does not select automatically merely because media begins.

Look for: Perform only the stated check, then confirm whether it could be completed.

• If Yes / this check is completed → Does the intended stream now play?
• If No / this cannot be confirmed → Keep the observation for manufacturer support
• If I do not know / cannot check → A required observation is unknown

• Manufacturer-documented Dynaudio Focus user manual ↗Focus 10 scope p.6; Bluetooth pp.17–18,24,27–28 — Three-second Bluetooth hold enters five-minute blue-flashing discovery. Ten stored devices, eleventh removes least recently active; only one live connection. Bluetooth input must be selected manually; changing input or standby disconnects. Network streams have priority.Focus 10, not older Focus XD. Rear Bluetooth ten-second hold deletes all pairings and is excluded. · Source checked 2026-11-09

step-4

Does the intended stream now play?

This input check does not diagnose a failed codec or amplifier.

Look for: Confirm the stated prerequisite or observation; unknown is not a fault diagnosis.

• If Yes / this check is completed → Checks completed — report your outcome
• If No / this cannot be confirmed → Keep the observation for manufacturer support
• If I do not know / cannot check → A required observation is unknown

• Manufacturer-documented Dynaudio Focus user manual ↗Focus 10 scope p.6; Bluetooth pp.17–18,24,27–28 — Three-second Bluetooth hold enters five-minute blue-flashing discovery. Ten stored devices, eleventh removes least recently active; only one live connection. Bluetooth input must be selected manually; changing input or standby disconnects. Network streams have priority.Focus 10, not older Focus XD. Rear Bluetooth ten-second hold deletes all pairings and is excluded. · Source checked 2026-11-09

Possible result

Checks completed — report your outcome

Completion does not automatically mean solved. Report what actually happened: solved, partly helped, did not help or could not follow. No Audio Review physical test is claimed.

steps completed

Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

Possible result

Keep the observation for manufacturer support

These steps did not establish a working setup. Keep the exact model, source, software and last observed response for support. No hardware or firmware defect is diagnosed.

next support

Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

Possible result

A required observation is unknown

Confirm the exact model and linked instructions before continuing. Do not guess the state of a control, connection or update.

insufficient data

Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.