Audio Fix / setup help

Denon PMA-900HNE: switch between already paired Bluetooth sources

Denon PMA-900HNE — switch between already paired Bluetooth sources. Follow the exact documented route and keep the actual result.

Manufacturer-documented Reviewed 2026-11-09 · Revision 1

Follow these checks in Audio Fix →

When this guide applies

Exact Denon PMA-900HNE. Both source records already exist; no new enrollment, forced reset or record replacement. Only normal external user controls; no mains modification, chassis opening, reset or firmware installation.

Connection scope: Bluetooth. Symptom: Switching between devices isn’t working.

This is a documented check, not a diagnosis of your equipment. The model name does not confirm the selected input, mode, software or connected partner.

If your exact model or a required setting is unknown, use the “I don’t know” branch below. Do not apply a similarly named model’s instructions.

Checks and possible outcomes

Start at scope. Follow the link that matches what you actually observe. Alternative branches are not a single sequence of actions.

scope

Confirm the exact setup

Both intended sources are already paired. The owner of the old source accepts turning its Bluetooth off, which also interrupts its other Bluetooth connections; every listener accepts stopping its playback.

Look for: Choose only a detail you can confirm.

  • Manufacturer-documented Denon PMA-900HNE official Owner’s Manual ↗PDF page 38: Reconnecting from a Bluetooth device — For changing an already paired source, deactivate Bluetooth on the currently connected source, activate Bluetooth on the intended saved source, select the unit from its device list and play. Re-pairing is not required.Exact Denon PMA-900HNE EU English manual. This guide does not substitute another receiver/amplifier’s buttons, menu or supported formats. · Source checked 2026-11-09

a1

Turn Bluetooth off on the currently connected old source

Do this only for that consenting source. Do not switch off radios on another person’s device.

Look for: Perform this one check and observe the actual response.

  • Manufacturer-documented Denon PMA-900HNE official Owner’s Manual ↗PDF page 38: Reconnecting from a Bluetooth device — For changing an already paired source, deactivate Bluetooth on the currently connected source, activate Bluetooth on the intended saved source, select the unit from its device list and play. Re-pairing is not required.Exact Denon PMA-900HNE EU English manual. This guide does not substitute another receiver/amplifier’s buttons, menu or supported formats. · Source checked 2026-11-09

a2

Turn Bluetooth on at the intended saved source

Use its normal Bluetooth setting, without forgetting the amplifier.

Look for: Perform this one check and observe the actual response.

  • Manufacturer-documented Denon PMA-900HNE official Owner’s Manual ↗PDF page 38: Reconnecting from a Bluetooth device — For changing an already paired source, deactivate Bluetooth on the currently connected source, activate Bluetooth on the intended saved source, select the unit from its device list and play. Re-pairing is not required.Exact Denon PMA-900HNE EU English manual. This guide does not substitute another receiver/amplifier’s buttons, menu or supported formats. · Source checked 2026-11-09

a3

Select this unit from that source’s saved device list

Start the intended quiet track after the saved connection is shown.

Look for: Perform this one check and observe the actual response.

  • Manufacturer-documented Denon PMA-900HNE official Owner’s Manual ↗PDF page 38: Reconnecting from a Bluetooth device — For changing an already paired source, deactivate Bluetooth on the currently connected source, activate Bluetooth on the intended saved source, select the unit from its device list and play. Re-pairing is not required.Exact Denon PMA-900HNE EU English manual. This guide does not substitute another receiver/amplifier’s buttons, menu or supported formats. · Source checked 2026-11-09

result

Check the actual result

Is the intended saved source now playing?

Look for: Choose only a detail you can confirm.

  • Manufacturer-documented Denon PMA-900HNE official Owner’s Manual ↗PDF page 38: Reconnecting from a Bluetooth device — For changing an already paired source, deactivate Bluetooth on the currently connected source, activate Bluetooth on the intended saved source, select the unit from its device list and play. Re-pairing is not required.Exact Denon PMA-900HNE EU English manual. This guide does not substitute another receiver/amplifier’s buttons, menu or supported formats. · Source checked 2026-11-09

Possible result

Confirm the unknown detail first

Do not infer a source setting, installed cartridge, connector role, software state or partner capability. Obtain the exact documentation before continuing.

insufficient data

Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

    Possible result

    Keep the actual observation for support

    Record the exact model, source, input and last observed response. These checks do not diagnose a failed component. No reset, service work or blind update is prescribed.

    next support

    Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

      Possible result

      Checks completed — keep the observed result

      This records the observation in this particular setup, not a guaranteed cure, physical Audio Review test or measurement.

      steps completed

      Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

        All Audio Fix guides → · TV & Audio Finder →

        Scroll to Top