Audio Fix / setup help
Chord Mojo 2: allow a normal restart after automatic shutdown
Chord Mojo 2 — allow a normal restart after automatic shutdown. Use the stated exact hardware and connection scope.
Manufacturer-documented Reviewed 2026-11-09 · Revision 1
Follow these checks in Audio Fix →When this guide applies
Exact Chord Mojo 2. Mojo2 was working and auto-shut down after no input. This checks normal power-on and startup, not battery service or charging-board repair.
Connection scope: Device controls / power only. Symptom: Power-on or automatic standby isn’t working.
This is a documented check, not a diagnosis of your equipment. The model name does not confirm the selected input, mode, software or connected partner.
If your exact model or a required setting is unknown, use the “I don’t know” branch below. Do not apply a similarly named model’s instructions.
Checks and possible outcomes
Start at scope. Follow the link that matches what you actually observe. Alternative branches are not a single sequence of actions.
scope
Confirm the model and connection
Mojo2 was working and auto-shut down after no input. This checks normal power-on and startup, not battery service or charging-board repair.
Look for: Confirm this exact setup and observation before continuing.
- If Yes, I confirm → Confirm charged normal-off state
- If No / my setup differs → Continue with source and model support
- If I cannot confirm → More information is required
- Manufacturer-documented Chord Mojo 2 — official manual v12 ↗Sections4,6.1–6.8,7.3–7.6 — Mojo2 has data USB-C/microUSB separate from microUSB charging, USB input priority and optical fallback, two shared-volume3.5 mm headphone jacks, power hold with colour startup, brightness and crossfeed under blue Menu, pulsing-Menu mute and magenta Lockdown.Exact Chord Mojo 2. · Source checked 2026-11-09
a1
Confirm charged normal-off state
Confirm Mojo2 has a sufficiently charged battery and shut down normally after inactivity, not from heat, damage or a flashing depleted-battery warning.
Look for: Observe the named indication or available control; stop if absent.
- If I completed this check → Power on normally
- If I cannot complete this → Continue with source and model support
- If I cannot determine this → More information is required
- Manufacturer-documented Chord Mojo 2 — official manual v12 ↗Sections4,6.1–6.8,7.3–7.6 — Mojo2 has data USB-C/microUSB separate from microUSB charging, USB input priority and optical fallback, two shared-volume3.5 mm headphone jacks, power hold with colour startup, brightness and crossfeed under blue Menu, pulsing-Menu mute and magenta Lockdown.Exact Chord Mojo 2. · Source checked 2026-11-09
a2
Power on normally
Hold Power until it illuminates, then release. Do not change charger, open the case or connect another headphone listener.
Look for: Observe the named indication or available control; stop if absent.
- If I completed this check → Wait for startup to finish
- If I cannot complete this → Continue with source and model support
- If I cannot determine this → More information is required
- Manufacturer-documented Chord Mojo 2 — official manual v12 ↗Sections4,6.1–6.8,7.3–7.6 — Mojo2 has data USB-C/microUSB separate from microUSB charging, USB input priority and optical fallback, two shared-volume3.5 mm headphone jacks, power hold with colour startup, brightness and crossfeed under blue Menu, pulsing-Menu mute and magenta Lockdown.Exact Chord Mojo 2. · Source checked 2026-11-09
a3
Wait for startup to finish
Wait until the automatic button-colour startup checks stop cycling before judging normal operation or playing quietly.
Look for: Observe the named indication or available control; stop if absent.
- If I completed this check → Check the result
- If I cannot complete this → Continue with source and model support
- If I cannot determine this → More information is required
- Manufacturer-documented Chord Mojo 2 — official manual v12 ↗Sections4,6.1–6.8,7.3–7.6 — Mojo2 has data USB-C/microUSB separate from microUSB charging, USB input priority and optical fallback, two shared-volume3.5 mm headphone jacks, power hold with colour startup, brightness and crossfeed under blue Menu, pulsing-Menu mute and magenta Lockdown.Exact Chord Mojo 2. · Source checked 2026-11-09
observe
Check the result
Does startup finish normally with steady ready-to-play indications?
Look for: Confirm this exact setup and observation before continuing.
- If Yes, I confirm → Checks completed
- If No / my setup differs → Continue with source and model support
- If I cannot confirm → More information is required
- Manufacturer-documented Chord Mojo 2 — official manual v12 ↗Sections4,6.1–6.8,7.3–7.6 — Mojo2 has data USB-C/microUSB separate from microUSB charging, USB input priority and optical fallback, two shared-volume3.5 mm headphone jacks, power hold with colour startup, brightness and crossfeed under blue Menu, pulsing-Menu mute and magenta Lockdown.Exact Chord Mojo 2. · Source checked 2026-11-09
Possible result
More information is required
An unknown state is not a diagnosis. Record the last visible indication and consult the exact model instructions.
insufficient data
Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.
Possible result
Continue with source and model support
Keep the source, connection and last observation. Do not reset, open equipment or change full-scale output to compensate for an unconfirmed result.
next support
Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.
Possible result
Checks completed
The requested observation was confirmed in this setup. It does not establish a hardware repair or guarantee another source behaves the same.
steps completed
Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.