Audio Fix / setup help
Audient iD14 MKII: select iD14 for an existing Logic Pro session
Audient iD14 MKII: select iD14 for an existing Logic Pro session. Check prerequisites and the actual response before reporting an outcome.
Manufacturer-documented Reviewed 2026-11-09 · Revision 1
Follow these checks in Audio Fix →When this guide applies
Compatible macOS/Logic setup; installed and connected iD14.
Connection scope: USB audio. Symptom: Recording or direct monitoring is not working.
This is a documented check, not a diagnosis of your equipment. The model name does not confirm the selected input, mode, software or connected partner.
If your exact model or a required setting is unknown, use the “I don’t know” branch below. Do not apply a similarly named model’s instructions.
Checks and possible outcomes
Start at step-0. Follow the link that matches what you actually observe. Alternative branches are not a single sequence of actions.
step-0
Is this a compatible Mac running Logic Pro with iD14 connected?
Other DAWs and unsupported hosts need their own setup.
Look for: Confirm the actual prerequisite or observation. Unknown stops safely.
- If Yes / check completed → May this session audio device change?
- If No / cannot confirm → Keep these observations for official support
- If I do not know / cannot check → A required fact is unknown
- Manufacturer-documented iD14 MKII DAW Setup | Audient Documentation ↗DAW Setup — Logic selects iD14 input/output under Settings > Audio > Devices. Mixer-monitored inputs should not also be software monitored; DAW input/buffer configuration differs from monitor mix.Exact model named in the retrieved manufacturer document header. · Source checked 2026-11-09
step-1
May this session audio device change?
Playback may pause; preserve current I/O settings and do not change a live take.
Look for: Confirm the actual prerequisite or observation. Unknown stops safely.
- If Yes / check completed → Open Logic Pro > Settings > Audio > Devices
- If No / cannot confirm → Keep these observations for official support
- If I do not know / cannot check → A required fact is unknown
- Manufacturer-documented iD14 MKII DAW Setup | Audient Documentation ↗DAW Setup — Logic selects iD14 input/output under Settings > Audio > Devices. Mixer-monitored inputs should not also be software monitored; DAW input/buffer configuration differs from monitor mix.Exact model named in the retrieved manufacturer document header. · Source checked 2026-11-09
step-2
Open Logic Pro > Settings > Audio > Devices
Inspect current input/output devices.
Look for: Perform only the stated operation, then confirm whether it could be completed.
- If Yes / check completed → Select iD14 for input and output
- If No / cannot confirm → Keep these observations for official support
- If I do not know / cannot check → A required fact is unknown
- Manufacturer-documented iD14 MKII DAW Setup | Audient Documentation ↗DAW Setup — Logic selects iD14 input/output under Settings > Audio > Devices. Mixer-monitored inputs should not also be software monitored; DAW input/buffer configuration differs from monitor mix.Exact model named in the retrieved manufacturer document header. · Source checked 2026-11-09
step-3
Select iD14 for input and output
Keep the intended track input and project sample rate; no I/O reset follows.
Look for: Perform only the stated operation, then confirm whether it could be completed.
- If Yes / check completed → Does the intended track input show its known signal?
- If No / cannot confirm → Keep these observations for official support
- If I do not know / cannot check → A required fact is unknown
- Manufacturer-documented iD14 MKII DAW Setup | Audient Documentation ↗DAW Setup — Logic selects iD14 input/output under Settings > Audio > Devices. Mixer-monitored inputs should not also be software monitored; DAW input/buffer configuration differs from monitor mix.Exact model named in the retrieved manufacturer document header. · Source checked 2026-11-09
step-4
Does the intended track input show its known signal?
A monitor mix meter alone does not confirm what Logic records.
Look for: Confirm the actual prerequisite or observation. Unknown stops safely.
- If Yes / check completed → Checks completed — report what happened
- If No / cannot confirm → Keep these observations for official support
- If I do not know / cannot check → A required fact is unknown
- Manufacturer-documented iD14 MKII DAW Setup | Audient Documentation ↗DAW Setup — Logic selects iD14 input/output under Settings > Audio > Devices. Mixer-monitored inputs should not also be software monitored; DAW input/buffer configuration differs from monitor mix.Exact model named in the retrieved manufacturer document header. · Source checked 2026-11-09
Possible result
Checks completed — report what happened
Completion is not an automatic solved result. Report solved, partly helped, did not help or could not follow based on your actual observation. No Audio Review physical test is claimed.
steps completed
Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.
Possible result
Keep these observations for official support
A required prerequisite or response was not confirmed. Stop this sequence and use the exact model and partner documentation. Do not escalate to a factory reset, firmware installation, internal repair or unsafe wiring change.
next support
Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.
Possible result
A required fact is unknown
Confirm the exact model, connection, partner capability and current control state before continuing. Do not guess settings or operate an updating product.
insufficient data
Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.