Audio Fix / setup help

ARCAM AVA25: enable audio at the intended television HDMI output

ARCAM AVA25 — enable audio at the intended television HDMI output. Confirm the actual setup and observed response before reporting an outcome.

Manufacturer-documented Reviewed 2026-11-09 · Revision 1

Follow these checks in Audio Fix →

When this guide applies

Direct HDMI source, known TV HDMI audio support; no claim of exclusive receiver/TV output.

Connection scope: HDMI / ARC / eARC audio. Symptom: Sound goes to the wrong output.

This is a documented check, not a diagnosis of your equipment. The model name does not confirm the selected input, mode, software or connected partner.

If your exact model or a required setting is unknown, use the “I don’t know” branch below. Do not apply a similarly named model’s instructions.

Checks and possible outcomes

Start at step-0. Follow the link that matches what you actually observe. Alternative branches are not a single sequence of actions.

step-0

Is the source directly connected to a receiver HDMI input?

A TV-app eARC return is a different audio direction.

Look for: Confirm the stated setup or observation. Unknown stops safely.

  • Manufacturer-documented ARCAM AVA25 official manual ↗PDF pages 45 — HDMI Audio to TV enables audio output to the connected television. It is distinct from selecting TV (eARC) return audio and from the Zone1 video-output choice.Direct HDMI player through receiver to a verified HDMI-audio-capable TV. · Source checked 2026-11-09

step-1

Does the exact connected TV support the player audio format on this HDMI input?

HDMI video alone does not prove audio or codec compatibility.

Look for: Confirm the stated setup or observation. Unknown stops safely.

  • Manufacturer-documented ARCAM AVA25 official manual ↗PDF pages 45 — HDMI Audio to TV enables audio output to the connected television. It is distinct from selecting TV (eARC) return audio and from the Zone1 video-output choice.Direct HDMI player through receiver to a verified HDMI-audio-capable TV. · Source checked 2026-11-09

step-2

Is HDMI Audio to TV currently Off?

Do not blindly toggle an unknown or already correct state.

Look for: Confirm the stated setup or observation. Unknown stops safely.

  • Manufacturer-documented ARCAM AVA25 official manual ↗PDF pages 45 — HDMI Audio to TV enables audio output to the connected television. It is distinct from selecting TV (eARC) return audio and from the Zone1 video-output choice.Direct HDMI player through receiver to a verified HDMI-audio-capable TV. · Source checked 2026-11-09

step-3

May TV-speaker audio become available with both listening levels down?

This changes destination availability; it does not promise the receiver speakers become silent.

Look for: Confirm the stated setup or observation. Unknown stops safely.

  • Manufacturer-documented ARCAM AVA25 official manual ↗PDF pages 45 — HDMI Audio to TV enables audio output to the connected television. It is distinct from selecting TV (eARC) return audio and from the Zone1 video-output choice.Direct HDMI player through receiver to a verified HDMI-audio-capable TV. · Source checked 2026-11-09

step-4

Set Settings > Settings > HDMI Setup > HDMI Audio to TV to On

Retain the previous state; leave CEC and output-port selection unchanged.

Look for: Perform only the stated operation and confirm whether it was possible.

  • Manufacturer-documented ARCAM AVA25 official manual ↗PDF pages 45 — HDMI Audio to TV enables audio output to the connected television. It is distinct from selecting TV (eARC) return audio and from the Zone1 video-output choice.Direct HDMI player through receiver to a verified HDMI-audio-capable TV. · Source checked 2026-11-09

step-5

Does the intended TV reproduce this player audio comfortably?

A saved destination setting alone is not an audible result.

Look for: Confirm the stated setup or observation. Unknown stops safely.

  • Manufacturer-documented ARCAM AVA25 official manual ↗PDF pages 45 — HDMI Audio to TV enables audio output to the connected television. It is distinct from selecting TV (eARC) return audio and from the Zone1 video-output choice.Direct HDMI player through receiver to a verified HDMI-audio-capable TV. · Source checked 2026-11-09

Possible result

Checks completed — report what happened

Completion is not an automatic solved result. Report your actual outcome; no Audio Review physical test or measured repair is claimed.

steps completed

Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

    Possible result

    Stop and retain the actual observations

    A required fact or response was not confirmed. Consult the exact product/partner documentation or official support. Do not escalate to a reset, update installation, internal repair or unsafe wiring change.

    next support

    Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

      Possible result

      A required fact is unknown

      Confirm the actual model, source, partner capability and current state before continuing. Do not guess a menu or interrupt a live session/update.

      insufficient data

      Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

        All Audio Fix guides → · TV & Audio Finder →

        Scroll to Top