Audio Fix / setup help

ARCAM AVA25: restore a known hidden input without changing every source

ARCAM AVA25 — restore a known hidden input without changing every source. Confirm the actual setup and observed response before reporting an outcome.

Manufacturer-documented Reviewed 2026-11-09 · Revision 1

Follow these checks in Audio Fix →

When this guide applies

A real supported input is hidden in its individual Input Setup.

Connection scope: Device controls / power only. Symptom: An option or codec is missing.

This is a documented check, not a diagnosis of your equipment. The model name does not confirm the selected input, mode, software or connected partner.

If your exact model or a required setting is unknown, use the “I don’t know” branch below. Do not apply a similarly named model’s instructions.

Checks and possible outcomes

Start at step-0. Follow the link that matches what you actually observe. Alternative branches are not a single sequence of actions.

step-0

Is the missing input a real connector/source supported by this exact model?

Unsupported features cannot be added by showing an input.

Look for: Confirm the stated setup or observation. Unknown stops safely.

  • Manufacturer-documented ARCAM AVA25 official manual ↗PDF pages 42, 43 — Input Setup can target a single physical input rather than Global. Show/Hide Input controls whether that input appears in menus and selection lists.Existing real input hidden accidentally; no unsupported connector or service invented. · Source checked 2026-11-09

step-1

Open Settings > Settings > Input Setup

Inspect rather than overwrite the Global configuration.

Look for: Perform only the stated operation and confirm whether it was possible.

  • Manufacturer-documented ARCAM AVA25 official manual ↗PDF pages 42, 43 — Input Setup can target a single physical input rather than Global. Show/Hide Input controls whether that input appears in menus and selection lists.Existing real input hidden accidentally; no unsupported connector or service invented. · Source checked 2026-11-09

step-2

Select only the intended individual input

Do not choose Global or another source.

Look for: Perform only the stated operation and confirm whether it was possible.

  • Manufacturer-documented ARCAM AVA25 official manual ↗PDF pages 42, 43 — Input Setup can target a single physical input rather than Global. Show/Hide Input controls whether that input appears in menus and selection lists.Existing real input hidden accidentally; no unsupported connector or service invented. · Source checked 2026-11-09

step-3

Is Show/Hide Input currently Hide, and do you want it available again?

An intentionally hidden unused input can remain hidden.

Look for: Confirm the stated setup or observation. Unknown stops safely.

  • Manufacturer-documented ARCAM AVA25 official manual ↗PDF pages 42, 43 — Input Setup can target a single physical input rather than Global. Show/Hide Input controls whether that input appears in menus and selection lists.Existing real input hidden accidentally; no unsupported connector or service invented. · Source checked 2026-11-09

step-4

Set that input Show/Hide Input to Show

Leave names, audio processing and other sources unchanged.

Look for: Perform only the stated operation and confirm whether it was possible.

  • Manufacturer-documented ARCAM AVA25 official manual ↗PDF pages 42, 43 — Input Setup can target a single physical input rather than Global. Show/Hide Input controls whether that input appears in menus and selection lists.Existing real input hidden accidentally; no unsupported connector or service invented. · Source checked 2026-11-09

step-5

Does it appear in the ordinary Input List?

Visibility does not prove a source is connected or playing.

Look for: Confirm the stated setup or observation. Unknown stops safely.

  • Manufacturer-documented ARCAM AVA25 official manual ↗PDF pages 42, 43 — Input Setup can target a single physical input rather than Global. Show/Hide Input controls whether that input appears in menus and selection lists.Existing real input hidden accidentally; no unsupported connector or service invented. · Source checked 2026-11-09

Possible result

Checks completed — report what happened

Completion is not an automatic solved result. Report your actual outcome; no Audio Review physical test or measured repair is claimed.

steps completed

Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

    Possible result

    Stop and retain the actual observations

    A required fact or response was not confirmed. Consult the exact product/partner documentation or official support. Do not escalate to a reset, update installation, internal repair or unsafe wiring change.

    next support

    Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

      Possible result

      A required fact is unknown

      Confirm the actual model, source, partner capability and current state before continuing. Do not guess a menu or interrupt a live session/update.

      insufficient data

      Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

        All Audio Fix guides → · TV & Audio Finder →

        Scroll to Top