Audio Fix / setup help

ARCAM AVA25: read installed component versions without installing firmware

ARCAM AVA25 — read installed component versions without installing firmware. Confirm the actual setup and observed response before reporting an outcome.

Manufacturer-documented Reviewed 2026-11-09 · Revision 1

Follow these checks in Audio Fix →

When this guide applies

Receiver on, no update in progress; local read-only diagnostic record.

Connection scope: Device controls / power only. Symptom: I need to check firmware update requirements.

This is a documented check, not a diagnosis of your equipment. The model name does not confirm the selected input, mode, software or connected partner.

If your exact model or a required setting is unknown, use the “I don’t know” branch below. Do not apply a similarly named model’s instructions.

Checks and possible outcomes

Start at step-0. Follow the link that matches what you actually observe. Alternative branches are not a single sequence of actions.

step-0

Is the receiver on with no firmware installation running?

Do not interrupt an update to inspect another menu.

Look for: Confirm the stated setup or observation. Unknown stops safely.

  • Manufacturer-documented ARCAM AVA25 official manual ↗PDF pages 47, 48 — Status is informational only. Software Versions separately listsHOST, NET, DSP, BT, HDMI and LCD. This is distinct from USB Update or reset execution.Read-only version collection; private serial/network identifiers are not requested. · Source checked 2026-11-09

step-1

Open Settings > Settings > Status

Use Status rather than General Setup USB Update.

Look for: Perform only the stated operation and confirm whether it was possible.

  • Manufacturer-documented ARCAM AVA25 official manual ↗PDF pages 47, 48 — Status is informational only. Software Versions separately listsHOST, NET, DSP, BT, HDMI and LCD. This is distinct from USB Update or reset execution.Read-only version collection; private serial/network identifiers are not requested. · Source checked 2026-11-09

step-2

Read the Software Versions entries for this unit

Keep HOST/NET/DSP/BT/HDMI/LCD separate; do not substitute another model version.

Look for: Perform only the stated operation and confirm whether it was possible.

  • Manufacturer-documented ARCAM AVA25 official manual ↗PDF pages 47, 48 — Status is informational only. Software Versions separately listsHOST, NET, DSP, BT, HDMI and LCD. This is distinct from USB Update or reset execution.Read-only version collection; private serial/network identifiers are not requested. · Source checked 2026-11-09

step-3

Are the actual displayed versions available to retain locally for support?

Do not submit serial numbers, MAC/IP addresses or infer a firmware cure from a version number.

Look for: Confirm the stated setup or observation. Unknown stops safely.

  • Manufacturer-documented ARCAM AVA25 official manual ↗PDF pages 47, 48 — Status is informational only. Software Versions separately listsHOST, NET, DSP, BT, HDMI and LCD. This is distinct from USB Update or reset execution.Read-only version collection; private serial/network identifiers are not requested. · Source checked 2026-11-09

Possible result

Checks completed — report what happened

Completion is not an automatic solved result. Report your actual outcome; no Audio Review physical test or measured repair is claimed.

steps completed

Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

    Possible result

    Stop and retain the actual observations

    A required fact or response was not confirmed. Consult the exact product/partner documentation or official support. Do not escalate to a reset, update installation, internal repair or unsafe wiring change.

    next support

    Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

      Possible result

      A required fact is unknown

      Confirm the actual model, source, partner capability and current state before continuing. Do not guess a menu or interrupt a live session/update.

      insufficient data

      Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

        All Audio Fix guides → · TV & Audio Finder →

        Scroll to Top