Audio Fix / setup help

Yamaha True X Bar 50A: handoff after the previous Bluetooth source reconnects

Yamaha True X Bar 50A: handoff after the previous Bluetooth source reconnects. Observe the actual response before reporting an outcome.

Manufacturer-documented Reviewed 2026-11-09 · Revision 1

Follow these checks in Audio Fix →

When this guide applies

Both pairings exist; selected input may reconnect the last source.

Connection scope: Bluetooth. Symptom: Switching between devices isn’t working.

This is a documented check, not a diagnosis of your equipment. The model name does not confirm the selected input, mode, software or connected partner.

If your exact model or a required setting is unknown, use the “I don’t know” branch below. Do not apply a similarly named model’s instructions.

Checks and possible outcomes

Start at step-0. Follow the link that matches what you actually observe. Alternative branches are not a single sequence of actions.

step-0

Are both intended sources already paired?

This flow changes the live connection, not saved pairings.

Look for: Confirm the stated prerequisite or observation; unknown is not a fault diagnosis.

  • Manufacturer-documented Yamaha TRUE X BAR 50A SR-X50A user guide ↗Listening to audio from a Bluetooth device — Brief remote BLUETOOTH selects the input and flashing connection-wait; connected indicator is solid blue. Source settings select the bar; last device may reconnect. Other inputs, power-off or at least five-second remote Bluetooth hold terminate connection. Source media volume may need adjustment. Bluetooth is stereo regardless of sound mode.Exact SR-X50A; do not apply to True X speakers or other bar generations. · Source checked 2026-11-09

step-1

Do you accept stopping the first source connection?

Its current media will stop.

Look for: Confirm the stated prerequisite or observation; unknown is not a fault diagnosis.

  • Manufacturer-documented Yamaha TRUE X BAR 50A SR-X50A user guide ↗Listening to audio from a Bluetooth device — Brief remote BLUETOOTH selects the input and flashing connection-wait; connected indicator is solid blue. Source settings select the bar; last device may reconnect. Other inputs, power-off or at least five-second remote Bluetooth hold terminate connection. Source media volume may need adjustment. Bluetooth is stereo regardless of sound mode.Exact SR-X50A; do not apply to True X speakers or other bar generations. · Source checked 2026-11-09

step-2

Disconnect the bar in first-source Bluetooth settings

Use Disconnect rather than turning off every Bluetooth accessory or Forget.

Look for: Perform only the stated check, then confirm whether it could be completed.

  • Manufacturer-documented Yamaha TRUE X BAR 50A SR-X50A user guide ↗Listening to audio from a Bluetooth device — Brief remote BLUETOOTH selects the input and flashing connection-wait; connected indicator is solid blue. Source settings select the bar; last device may reconnect. Other inputs, power-off or at least five-second remote Bluetooth hold terminate connection. Source media volume may need adjustment. Bluetooth is stereo regardless of sound mode.Exact SR-X50A; do not apply to True X speakers or other bar generations. · Source checked 2026-11-09

step-3

Connect the existing bar entry on the second source

Use the second source Bluetooth device list.

Look for: Perform only the stated check, then confirm whether it could be completed.

  • Manufacturer-documented Yamaha TRUE X BAR 50A SR-X50A user guide ↗Listening to audio from a Bluetooth device — Brief remote BLUETOOTH selects the input and flashing connection-wait; connected indicator is solid blue. Source settings select the bar; last device may reconnect. Other inputs, power-off or at least five-second remote Bluetooth hold terminate connection. Source media volume may need adjustment. Bluetooth is stereo regardless of sound mode.Exact SR-X50A; do not apply to True X speakers or other bar generations. · Source checked 2026-11-09

step-4

Does the bar show solid blue with the second source connected?

Do not change to another input or power off during this observation; either ends the Bluetooth connection.

Look for: Confirm the stated prerequisite or observation; unknown is not a fault diagnosis.

  • Manufacturer-documented Yamaha TRUE X BAR 50A SR-X50A user guide ↗Listening to audio from a Bluetooth device — Brief remote BLUETOOTH selects the input and flashing connection-wait; connected indicator is solid blue. Source settings select the bar; last device may reconnect. Other inputs, power-off or at least five-second remote Bluetooth hold terminate connection. Source media volume may need adjustment. Bluetooth is stereo regardless of sound mode.Exact SR-X50A; do not apply to True X speakers or other bar generations. · Source checked 2026-11-09

Possible result

Checks completed — report your outcome

Completion does not automatically mean solved. Report what actually happened: solved, partly helped, did not help or could not follow. No Audio Review physical test is claimed.

steps completed

Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

    Possible result

    Keep the observation for manufacturer support

    These steps did not establish a working setup. Keep the exact model, source, software and last observed response for support. No hardware or firmware defect is diagnosed.

    next support

    Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

      Possible result

      A required observation is unknown

      Confirm the exact model and linked instructions before continuing. Do not guess the state of a control, connection or update.

      insufficient data

      Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

        All Audio Fix guides → · TV & Audio Finder →

        Scroll to Top