Audio Fix / setup help

WiiM Amp Ultra: Apply the intended existing EQ profile to the active source

WiiM Amp Ultra — Apply the intended existing EQ profile to the active source. Follow the exact documented route and keep the actual result.

Manufacturer-documented Reviewed 2026-11-09 · Revision 1

Follow these checks in Audio Fix →

When this guide applies

Exact WiiM Amp Ultra. Existing saved/preset profile is known and EQ is already On for the affected input. Source-specific EQ changes apply only to the selected input; no creation or deletion of a profile. Only normal external user controls; no mains modification, chassis opening, reset or firmware installation.

Connection scope: Analog line / headphone audio · Optical digital audio · HDMI / ARC / eARC audio · Wi-Fi / Ethernet network audio · Bluetooth. Symptom: An option or codec is missing.

This is a documented check, not a diagnosis of your equipment. The model name does not confirm the selected input, mode, software or connected partner.

If your exact model or a required setting is unknown, use the “I don’t know” branch below. Do not apply a similarly named model’s instructions.

Checks and possible outcomes

Start at scope. Follow the link that matches what you actually observe. Alternative branches are not a single sequence of actions.

scope

Confirm the exact setup

Is Per-Source EQ visibly available on this exact device, with EQ already On for the affected input, that source playing quietly and the desired existing profile known?

Look for: Choose only a detail you can confirm.

  • Manufacturer-documented WiiM Amp Ultra User Manual ↗Audio settings / Equalizer, PDF pp40 and 43 — This exact model supports Per-Source EQ in WiiM Home.Exact WiiM Amp Ultra; retained manual edition, not an inferred firmware version. · Source checked 2026-11-09
  • Manufacturer-documented WiiM: How to Use Per-Source EQ ↗Graphic EQ instructions 1–5 — Devices > Device Settings > EQ selects an input source. EQ applies immediately to that selected source; existing presets can be chosen without rewriting other source profiles.Manufacturer platform procedure bound to exact-model Per-Source EQ support in its manual; visible installed control required. · Source checked 2026-11-09

a1

Open this device EQ settings

In WiiM Home, open Devices > the exact device Settings > EQ.

Look for: Perform this one check and observe the actual response.

  • Manufacturer-documented WiiM Amp Ultra User Manual ↗Audio settings / Equalizer, PDF pp40 and 43 — This exact model supports Per-Source EQ in WiiM Home.Exact WiiM Amp Ultra; retained manual edition, not an inferred firmware version. · Source checked 2026-11-09
  • Manufacturer-documented WiiM: How to Use Per-Source EQ ↗Graphic EQ instructions 1–5 — Devices > Device Settings > EQ selects an input source. EQ applies immediately to that selected source; existing presets can be chosen without rewriting other source profiles.Manufacturer platform procedure bound to exact-model Per-Source EQ support in its manual; visible installed control required. · Source checked 2026-11-09

a2

Select the affected input source

Choose the actual active input source, rather than the previously tuned input.

Look for: Perform this one check and observe the actual response.

  • Manufacturer-documented WiiM Amp Ultra User Manual ↗Audio settings / Equalizer, PDF pp40 and 43 — This exact model supports Per-Source EQ in WiiM Home.Exact WiiM Amp Ultra; retained manual edition, not an inferred firmware version. · Source checked 2026-11-09
  • Manufacturer-documented WiiM: How to Use Per-Source EQ ↗Graphic EQ instructions 1–5 — Devices > Device Settings > EQ selects an input source. EQ applies immediately to that selected source; existing presets can be chosen without rewriting other source profiles.Manufacturer platform procedure bound to exact-model Per-Source EQ support in its manual; visible installed control required. · Source checked 2026-11-09

a3

Apply the intended existing profile

If EQ is already On for that source, select the intended existing preset/profile. If it is Off or the intended profile cannot be identified, stop instead of guessing or overwriting settings.

Look for: Perform this one check and observe the actual response.

  • Manufacturer-documented WiiM Amp Ultra User Manual ↗Audio settings / Equalizer, PDF pp40 and 43 — This exact model supports Per-Source EQ in WiiM Home.Exact WiiM Amp Ultra; retained manual edition, not an inferred firmware version. · Source checked 2026-11-09
  • Manufacturer-documented WiiM: How to Use Per-Source EQ ↗Graphic EQ instructions 1–5 — Devices > Device Settings > EQ selects an input source. EQ applies immediately to that selected source; existing presets can be chosen without rewriting other source profiles.Manufacturer platform procedure bound to exact-model Per-Source EQ support in its manual; visible installed control required. · Source checked 2026-11-09

result

Check the actual result

Does the affected source now display the intended existing EQ profile?

Look for: Choose only a detail you can confirm.

  • Manufacturer-documented WiiM Amp Ultra User Manual ↗Audio settings / Equalizer, PDF pp40 and 43 — This exact model supports Per-Source EQ in WiiM Home.Exact WiiM Amp Ultra; retained manual edition, not an inferred firmware version. · Source checked 2026-11-09
  • Manufacturer-documented WiiM: How to Use Per-Source EQ ↗Graphic EQ instructions 1–5 — Devices > Device Settings > EQ selects an input source. EQ applies immediately to that selected source; existing presets can be chosen without rewriting other source profiles.Manufacturer platform procedure bound to exact-model Per-Source EQ support in its manual; visible installed control required. · Source checked 2026-11-09

Possible result

Confirm the unknown detail first

Do not infer a source setting, installed cartridge, connector role, software state or partner capability. Obtain the exact documentation before continuing.

insufficient data

Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

    Possible result

    Keep the actual observation for support

    Record the exact model, source, input and last observed response. These checks do not diagnose a failed component. No reset, service work or blind update is prescribed.

    next support

    Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

      Possible result

      Checks completed — keep the observed result

      This records the observation in this particular setup, not a guaranteed cure, physical Audio Review test or measurement.

      steps completed

      Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

        All Audio Fix guides → · TV & Audio Finder →

        Scroll to Top