Audio Fix / setup help
Technics EAH-AZ60M2: compare ANC with the correct external-sound mode
Technics EAH-AZ60M2 — Compare ANC with the correct external-sound mode. Follow the exact-model instructions and confirm the result.
Manufacturer-documented Reviewed 2026-11-09 · Revision 1
Follow these checks in Audio Fix →When this guide applies
Exact Technics EAH-AZ60M2 with a Bluetooth source. Noise reduction is the complaint, not an active call mute issue. Do not obstruct the microphones. Reversible checks only; no factory reset or pairing-list deletion.
Connection scope: Bluetooth. Symptom: Noise cancellation or listening modes aren’t working.
This is a documented check, not a diagnosis of your equipment. The model name does not confirm the selected input, mode, software or connected partner.
If your exact model or a required setting is unknown, use the “I don’t know” branch below. Do not apply a similarly named model’s instructions.
Checks and possible outcomes
Start at scope. Follow the link that matches what you actually observe. Alternative branches are not a single sequence of actions.
scope
Confirm the setup
Noise reduction is the complaint, not an active call mute issue. Do not obstruct the microphones.
Look for: Confirm this setup before changing anything.
- If This describes my setup → Check fit
- If My setup differs → Use model and source support
- If I do not know / cannot check → More information is needed
- Manufacturer-documented Technics EAH-AZ60M2 official instructions ↗Model-specific charging pp.24–27; pairing/memory pp.34–37; multipoint pp.40–41; controls pp.41–43; voice test p.52; settings pp.56–60; troubleshooting pp.64–66 — The listed model supports USB charging, touch customisation, external sound controls, app delay suppression, call mute and its specifically named voice test. Up to ten pairings are saved; exceeding that limit overwrites an earlier pairing. Classic multipoint supports up to three sources with the matching app connection-count setting.Exact Technics EAH-AZ60M2. Only Technics EAH-AZ60M2 sections and common sections explicitly covering it. No AZ40M2 or legacy AZ60 assumption. · Source checked 2026-11-09
a1
Check fit
Wear both earbuds securely with comfortable correctly attached earpieces.
Look for: Observe the stated control or indication.
- If I completed this check → Open external sound control
- If I could not complete it → Use model and source support
- If I do not know / cannot check → More information is needed
- Manufacturer-documented Technics EAH-AZ60M2 official instructions ↗Model-specific charging pp.24–27; pairing/memory pp.34–37; multipoint pp.40–41; controls pp.41–43; voice test p.52; settings pp.56–60; troubleshooting pp.64–66 — The listed model supports USB charging, touch customisation, external sound controls, app delay suppression, call mute and its specifically named voice test. Up to ten pairings are saved; exceeding that limit overwrites an earlier pairing. Classic multipoint supports up to three sources with the matching app connection-count setting.Exact Technics EAH-AZ60M2. Only Technics EAH-AZ60M2 sections and common sections explicitly covering it. No AZ40M2 or legacy AZ60 assumption. · Source checked 2026-11-09
a2
Open external sound control
Open the model external-sound controls in Technics Audio Connect.
Look for: Observe the stated control or indication.
- If I completed this check → Choose noise cancelling
- If I could not complete it → Use model and source support
- If I do not know / cannot check → More information is needed
- Manufacturer-documented Technics EAH-AZ60M2 official instructions ↗Model-specific charging pp.24–27; pairing/memory pp.34–37; multipoint pp.40–41; controls pp.41–43; voice test p.52; settings pp.56–60; troubleshooting pp.64–66 — The listed model supports USB charging, touch customisation, external sound controls, app delay suppression, call mute and its specifically named voice test. Up to ten pairings are saved; exceeding that limit overwrites an earlier pairing. Classic multipoint supports up to three sources with the matching app connection-count setting.Exact Technics EAH-AZ60M2. Only Technics EAH-AZ60M2 sections and common sections explicitly covering it. No AZ40M2 or legacy AZ60 assumption. · Source checked 2026-11-09
a3
Choose noise cancelling
Select noise cancelling rather than Ambient sound or Off for the comparison.
Look for: Observe the stated control or indication.
- If I completed this check → Check the result
- If I could not complete it → Use model and source support
- If I do not know / cannot check → More information is needed
- Manufacturer-documented Technics EAH-AZ60M2 official instructions ↗Model-specific charging pp.24–27; pairing/memory pp.34–37; multipoint pp.40–41; controls pp.41–43; voice test p.52; settings pp.56–60; troubleshooting pp.64–66 — The listed model supports USB charging, touch customisation, external sound controls, app delay suppression, call mute and its specifically named voice test. Up to ten pairings are saved; exceeding that limit overwrites an earlier pairing. Classic multipoint supports up to three sources with the matching app connection-count setting.Exact Technics EAH-AZ60M2. Only Technics EAH-AZ60M2 sections and common sections explicitly covering it. No AZ40M2 or legacy AZ60 assumption. · Source checked 2026-11-09
observe
Check the result
Does steady surrounding noise reduce relative to Ambient sound?
Look for: Report the observation; completing steps does not establish a repair.
- If The expected result is present → Checks completed
- If The problem remains → Use model and source support
- If I do not know / cannot check → More information is needed
- Manufacturer-documented Technics EAH-AZ60M2 official instructions ↗Model-specific charging pp.24–27; pairing/memory pp.34–37; multipoint pp.40–41; controls pp.41–43; voice test p.52; settings pp.56–60; troubleshooting pp.64–66 — The listed model supports USB charging, touch customisation, external sound controls, app delay suppression, call mute and its specifically named voice test. Up to ten pairings are saved; exceeding that limit overwrites an earlier pairing. Classic multipoint supports up to three sources with the matching app connection-count setting.Exact Technics EAH-AZ60M2. Only Technics EAH-AZ60M2 sections and common sections explicitly covering it. No AZ40M2 or legacy AZ60 assumption. · Source checked 2026-11-09
Possible result
More information is needed
No diagnosis follows from an unknown answer. Record the last visible indication and consult the exact-model instructions or support.
insufficient data
Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.
Possible result
Use model and source support
Keep the symptom and last observed step. Do not clear pairings or reset settings on the basis of this guide.
next support
Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.
Possible result
Checks completed
You confirmed the requested observation in this setup. This is not a laboratory test or a promise about other apps and sources.
steps completed
Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.