Audio Fix / setup help
Technics EAH-AZ60M2: check whether touch operations were disabled
Technics EAH-AZ60M2 — Check whether touch operations were disabled. Follow the exact-model instructions and confirm the result.
Manufacturer-documented Reviewed 2026-11-09 · Revision 1
Follow these checks in Audio Fix →When this guide applies
Exact Technics EAH-AZ60M2 with a Bluetooth source. A touch gesture does not work; assigned functions and supported source apps may differ. Reversible checks only; no factory reset or pairing-list deletion.
Connection scope: Bluetooth. Symptom: Buttons, touch controls or wear detection aren’t working.
This is a documented check, not a diagnosis of your equipment. The model name does not confirm the selected input, mode, software or connected partner.
If your exact model or a required setting is unknown, use the “I don’t know” branch below. Do not apply a similarly named model’s instructions.
Checks and possible outcomes
Start at scope. Follow the link that matches what you actually observe. Alternative branches are not a single sequence of actions.
scope
Confirm the setup
A touch gesture does not work; assigned functions and supported source apps may differ.
Look for: Confirm this setup before changing anything.
- If This describes my setup → Open app settings
- If My setup differs → Use model and source support
- If I do not know / cannot check → More information is needed
- Manufacturer-documented Technics EAH-AZ60M2 official instructions ↗Model-specific charging pp.24–27; pairing/memory pp.34–37; multipoint pp.40–41; controls pp.41–43; voice test p.52; settings pp.56–60; troubleshooting pp.64–66 — The listed model supports USB charging, touch customisation, external sound controls, app delay suppression, call mute and its specifically named voice test. Up to ten pairings are saved; exceeding that limit overwrites an earlier pairing. Classic multipoint supports up to three sources with the matching app connection-count setting.Exact Technics EAH-AZ60M2. Only Technics EAH-AZ60M2 sections and common sections explicitly covering it. No AZ40M2 or legacy AZ60 assumption. · Source checked 2026-11-09
a1
Open app settings
Open SETTINGS in Technics Audio Connect for Technics EAH-AZ60M2.
Look for: Observe the stated control or indication.
- If I completed this check → Open touch customisation
- If I could not complete it → Use model and source support
- If I do not know / cannot check → More information is needed
- Manufacturer-documented Technics EAH-AZ60M2 official instructions ↗Model-specific charging pp.24–27; pairing/memory pp.34–37; multipoint pp.40–41; controls pp.41–43; voice test p.52; settings pp.56–60; troubleshooting pp.64–66 — The listed model supports USB charging, touch customisation, external sound controls, app delay suppression, call mute and its specifically named voice test. Up to ten pairings are saved; exceeding that limit overwrites an earlier pairing. Classic multipoint supports up to three sources with the matching app connection-count setting.Exact Technics EAH-AZ60M2. Only Technics EAH-AZ60M2 sections and common sections explicitly covering it. No AZ40M2 or legacy AZ60 assumption. · Source checked 2026-11-09
a2
Open touch customisation
Select Customizing the touch sensor.
Look for: Observe the stated control or indication.
- If I completed this check → Enable touch operations
- If I could not complete it → Use model and source support
- If I do not know / cannot check → More information is needed
- Manufacturer-documented Technics EAH-AZ60M2 official instructions ↗Model-specific charging pp.24–27; pairing/memory pp.34–37; multipoint pp.40–41; controls pp.41–43; voice test p.52; settings pp.56–60; troubleshooting pp.64–66 — The listed model supports USB charging, touch customisation, external sound controls, app delay suppression, call mute and its specifically named voice test. Up to ten pairings are saved; exceeding that limit overwrites an earlier pairing. Classic multipoint supports up to three sources with the matching app connection-count setting.Exact Technics EAH-AZ60M2. Only Technics EAH-AZ60M2 sections and common sections explicitly covering it. No AZ40M2 or legacy AZ60 assumption. · Source checked 2026-11-09
a3
Enable touch operations
Set Touch sensor operations to enabled.
Look for: Observe the stated control or indication.
- If I completed this check → Inspect General operations
- If I could not complete it → Use model and source support
- If I do not know / cannot check → More information is needed
- Manufacturer-documented Technics EAH-AZ60M2 official instructions ↗Model-specific charging pp.24–27; pairing/memory pp.34–37; multipoint pp.40–41; controls pp.41–43; voice test p.52; settings pp.56–60; troubleshooting pp.64–66 — The listed model supports USB charging, touch customisation, external sound controls, app delay suppression, call mute and its specifically named voice test. Up to ten pairings are saved; exceeding that limit overwrites an earlier pairing. Classic multipoint supports up to three sources with the matching app connection-count setting.Exact Technics EAH-AZ60M2. Only Technics EAH-AZ60M2 sections and common sections explicitly covering it. No AZ40M2 or legacy AZ60 assumption. · Source checked 2026-11-09
a4
Inspect General operations
Inspect the desired General operations gesture assignment.
Look for: Observe the stated control or indication.
- If I completed this check → Try the displayed gesture
- If I could not complete it → Use model and source support
- If I do not know / cannot check → More information is needed
- Manufacturer-documented Technics EAH-AZ60M2 official instructions ↗Model-specific charging pp.24–27; pairing/memory pp.34–37; multipoint pp.40–41; controls pp.41–43; voice test p.52; settings pp.56–60; troubleshooting pp.64–66 — The listed model supports USB charging, touch customisation, external sound controls, app delay suppression, call mute and its specifically named voice test. Up to ten pairings are saved; exceeding that limit overwrites an earlier pairing. Classic multipoint supports up to three sources with the matching app connection-count setting.Exact Technics EAH-AZ60M2. Only Technics EAH-AZ60M2 sections and common sections explicitly covering it. No AZ40M2 or legacy AZ60 assumption. · Source checked 2026-11-09
a5
Try the displayed gesture
Use that assigned gesture in the relevant music/call context.
Look for: Observe the stated control or indication.
- If I completed this check → Check the result
- If I could not complete it → Use model and source support
- If I do not know / cannot check → More information is needed
- Manufacturer-documented Technics EAH-AZ60M2 official instructions ↗Model-specific charging pp.24–27; pairing/memory pp.34–37; multipoint pp.40–41; controls pp.41–43; voice test p.52; settings pp.56–60; troubleshooting pp.64–66 — The listed model supports USB charging, touch customisation, external sound controls, app delay suppression, call mute and its specifically named voice test. Up to ten pairings are saved; exceeding that limit overwrites an earlier pairing. Classic multipoint supports up to three sources with the matching app connection-count setting.Exact Technics EAH-AZ60M2. Only Technics EAH-AZ60M2 sections and common sections explicitly covering it. No AZ40M2 or legacy AZ60 assumption. · Source checked 2026-11-09
observe
Check the result
Does the assigned touch operation control the intended function?
Look for: Report the observation; completing steps does not establish a repair.
- If The expected result is present → Checks completed
- If The problem remains → Use model and source support
- If I do not know / cannot check → More information is needed
- Manufacturer-documented Technics EAH-AZ60M2 official instructions ↗Model-specific charging pp.24–27; pairing/memory pp.34–37; multipoint pp.40–41; controls pp.41–43; voice test p.52; settings pp.56–60; troubleshooting pp.64–66 — The listed model supports USB charging, touch customisation, external sound controls, app delay suppression, call mute and its specifically named voice test. Up to ten pairings are saved; exceeding that limit overwrites an earlier pairing. Classic multipoint supports up to three sources with the matching app connection-count setting.Exact Technics EAH-AZ60M2. Only Technics EAH-AZ60M2 sections and common sections explicitly covering it. No AZ40M2 or legacy AZ60 assumption. · Source checked 2026-11-09
Possible result
More information is needed
No diagnosis follows from an unknown answer. Record the last visible indication and consult the exact-model instructions or support.
insufficient data
Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.
Possible result
Use model and source support
Keep the symptom and last observed step. Do not clear pairings or reset settings on the basis of this guide.
next support
Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.
Possible result
Checks completed
You confirmed the requested observation in this setup. This is not a laboratory test or a promise about other apps and sources.
steps completed
Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.