Audio Fix / setup help
SSL 2+ MKII: increase an undersized buffer for an overloaded playback session
SSL 2+ MKII: increase an undersized buffer for an overloaded playback session. Check prerequisites and the actual response before reporting an outcome.
Manufacturer-documented Reviewed 2026-11-09 · Revision 1
Follow these checks in Audio Fix →When this guide applies
DAW playback errors or pops/clicks in a processing-heavy session, not input clipping.
Connection scope: USB audio. Symptom: Audio keeps cutting out.
This is a documented check, not a diagnosis of your equipment. The model name does not confirm the selected input, mode, software or connected partner.
If your exact model or a required setting is unknown, use the “I don’t know” branch below. Do not apply a similarly named model’s instructions.
Checks and possible outcomes
Start at step-0. Follow the link that matches what you actually observe. Alternative branches are not a single sequence of actions.
step-0
Are playback errors or pops/clicks present in a processing-heavy DAW session?
A red analogue input meter or damaged source is a different issue.
Look for: Confirm the actual prerequisite or observation. Unknown stops safely.
- If Yes / check completed → Is no live take, broadcast or time-critical input monitoring active?
- If No / cannot confirm → Keep these observations for official support
- If I do not know / cannot check → A required fact is unknown
- Manufacturer-documented SSL 2+ MKII official user guide ↗PDF pages 31 — Higher DAW buffer sizes, typically 256 samples and above, allow more processing time and can avoid overloaded-session playback errors/pops/clicks; increased monitoring delay is a tradeoff.Exact model/generation named in this manual; external controls and documented host paths only. · Source checked 2026-11-09
step-1
Is no live take, broadcast or time-critical input monitoring active?
Buffer changes may interrupt playback and increase software monitoring delay.
Look for: Confirm the actual prerequisite or observation. Unknown stops safely.
- If Yes / check completed → May the buffer increase, with its old value noted?
- If No / cannot confirm → Keep these observations for official support
- If I do not know / cannot check → A required fact is unknown
- Manufacturer-documented SSL 2+ MKII official user guide ↗PDF pages 31 — Higher DAW buffer sizes, typically 256 samples and above, allow more processing time and can avoid overloaded-session playback errors/pops/clicks; increased monitoring delay is a tradeoff.Exact model/generation named in this manual; external controls and documented host paths only. · Source checked 2026-11-09
step-2
May the buffer increase, with its old value noted?
Retain the old setting to restore if this does not help.
Look for: Confirm the actual prerequisite or observation. Unknown stops safely.
- If Yes / check completed → Increase the DAW audio buffer to a supported higher value
- If No / cannot confirm → Keep these observations for official support
- If I do not know / cannot check → A required fact is unknown
- Manufacturer-documented SSL 2+ MKII official user guide ↗PDF pages 31 — Higher DAW buffer sizes, typically 256 samples and above, allow more processing time and can avoid overloaded-session playback errors/pops/clicks; increased monitoring delay is a tradeoff.Exact model/generation named in this manual; external controls and documented host paths only. · Source checked 2026-11-09
step-3
Increase the DAW audio buffer to a supported higher value
The manual gives 256 samples and above as a common playback choice; do not invent a value absent from the actual driver.
Look for: Perform only the stated operation, then confirm whether it could be completed.
- If Yes / check completed → Does the same session play with fewer interruptions?
- If No / cannot confirm → Keep these observations for official support
- If I do not know / cannot check → A required fact is unknown
- Manufacturer-documented SSL 2+ MKII official user guide ↗PDF pages 31 — Higher DAW buffer sizes, typically 256 samples and above, allow more processing time and can avoid overloaded-session playback errors/pops/clicks; increased monitoring delay is a tradeoff.Exact model/generation named in this manual; external controls and documented host paths only. · Source checked 2026-11-09
step-4
Does the same session play with fewer interruptions?
If unchanged, restore the old value and retain the error details; do not claim the cause proven.
Look for: Confirm the actual prerequisite or observation. Unknown stops safely.
- If Yes / check completed → Checks completed — report what happened
- If No / cannot confirm → Keep these observations for official support
- If I do not know / cannot check → A required fact is unknown
- Manufacturer-documented SSL 2+ MKII official user guide ↗PDF pages 31 — Higher DAW buffer sizes, typically 256 samples and above, allow more processing time and can avoid overloaded-session playback errors/pops/clicks; increased monitoring delay is a tradeoff.Exact model/generation named in this manual; external controls and documented host paths only. · Source checked 2026-11-09
Possible result
Checks completed — report what happened
Completion is not an automatic solved result. Report solved, partly helped, did not help or could not follow based on your actual observation. No Audio Review physical test is claimed.
steps completed
Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.
Possible result
Keep these observations for official support
A required prerequisite or response was not confirmed. Stop this sequence and use the exact model and partner documentation. Do not escalate to a factory reset, firmware installation, internal repair or unsafe wiring change.
next support
Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.
Possible result
A required fact is unknown
Confirm the exact model, connection, partner capability and current control state before continuing. Do not guess settings or operate an updating product.
insufficient data
Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.