Audio Fix / setup help

Space One Pro: a missing LDAC option or uncertain codec

Check source support, the documented app control and the difference between an enabled mode and an active codec.

Manufacturer-documented Reviewed 2026-11-09 · Revision 1

Follow these checks in Audio Fix →

When this guide applies

Space One Pro over Bluetooth from an Android source. The exact source must document LDAC; no firmware cutoff is invented. If the app differs, stop rather than substitute Space One instructions.

Connection scope: Bluetooth. Symptom: An option or codec is missing.

This is a documented check, not a diagnosis of your equipment. The model name does not confirm the selected input, mode, software or connected partner.

If your exact model or a required setting is unknown, use the “I don’t know” branch below. Do not apply a similarly named model’s instructions.

What owners have reported

These are public, self-reported experiences. They help explain the order of checks and the limits of a guide. They are not controlled tests, proof of a cause, a success rate or a substitute for the manufacturer instructions above.

User-reported Space One Pro codec indication on a Pixel phone

A Space One Pro owner reports an app LDAC label while the phone codec indicator showed another codec, including after reconnecting.

How this informs the checks: Distinguish an app’s enabled mode from the source’s active codec. Do not prescribe developer-option bitrate changes from this anecdote.

Limits: The later support-email account is user-supplied and not independently authenticated; no universal Pixel or headphone fault is established.

Read the original public discussion ↗ · Reviewed 2026-11-09

Checks and possible outcomes

Start at source. Follow the link that matches what you actually observe. Alternative branches are not a single sequence of actions.

source

Does your exact Android source document LDAC?

Check its manufacturer documentation. The source being Android or playing Bluetooth audio does not by itself confirm LDAC.

Look for: Choose the answer that describes what you can actually observe.

  • Manufacturer-documented How to Enable LDAC for Space One Pro ↗LDAC activation, step 1 — For Android, the soundcore app exposes Settings > Sound Mode > Preferred Audio Quality. LDAC prevents simultaneous two-device connection.Exact Space One Pro; no minimum app/firmware version is specified on this page. Source LDAC support and active codec still need checking. · Source checked 2026-11-09

mode

Open the documented Space One Pro sound mode

In the soundcore app, select Space One Pro, then Settings > Sound Mode > Preferred Audio Quality. This mode prevents two-device connection.

Look for: Choose the answer that describes what you can actually observe.

  • Manufacturer-documented How to Enable LDAC for Space One Pro ↗LDAC activation, step 1 — For Android, the soundcore app exposes Settings > Sound Mode > Preferred Audio Quality. LDAC prevents simultaneous two-device connection.Exact Space One Pro; no minimum app/firmware version is specified on this page. Source LDAC support and active codec still need checking. · Source checked 2026-11-09

observe

Can the source confirm the codec during playback?

If your source offers a documented active-codec indicator, check it while playing audio. An app mode label alone is not a codec measurement.

Look for: Choose the answer that describes what you can actually observe.

  • Manufacturer-documented How to Enable LDAC for Space One Pro ↗LDAC activation, step 1 — For Android, the soundcore app exposes Settings > Sound Mode > Preferred Audio Quality. LDAC prevents simultaneous two-device connection.Exact Space One Pro; no minimum app/firmware version is specified on this page. Source LDAC support and active codec still need checking. · Source checked 2026-11-09

Possible result

Both ends need the codec

Enabling a headphone mode cannot add unsupported codec capability to the source. Continue using a mutually supported codec or ask the source manufacturer about LDAC support.

documented limitation

Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

  • Manufacturer-documented How to Enable LDAC for Space One Pro ↗LDAC activation, step 1 — For Android, the soundcore app exposes Settings > Sound Mode > Preferred Audio Quality. LDAC prevents simultaneous two-device connection.Exact Space One Pro; no minimum app/firmware version is specified on this page. Source LDAC support and active codec still need checking. · Source checked 2026-11-09

Possible result

A required observation is missing

Keep the unknown value rather than selecting a similar model or guessing a menu. Check the linked documentation for the exact device and software. If it still differs, ask manufacturer support; this flow cannot confirm the missing detail.

insufficient data

Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

    Possible result

    Continue with documented support

    The checks have not established a working setup. Give the manufacturer your exact models, software versions and the observation at the last step. No hardware fault or cause has been diagnosed. Do not post private identifiers in Audio Fix feedback.

    next support

    Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

      Possible result

      Checks completed — report the outcome

      Reaching this screen records completion only. Choose the feedback option that describes your own result; it is not a physical test by Audio Review.

      steps completed

      Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

        All Audio Fix guides → · TV & Audio Finder →

        Scroll to Top