Audio Fix / setup help

Soundcore Motion 300: check the documented LDAC option

Soundcore Motion 300 — Check the documented LDAC option. Check the documented control or configuration and record the actual result.

Manufacturer-documented Reviewed 2026-11-09 · Revision 1

Follow these checks in Audio Fix →

When this guide applies

Exact Soundcore Motion 300. Single-speaker Bluetooth connection. No Android Developer Options or guessed firmware version. Bluetooth source context; no reset or saved-pairing deletion is prescribed.

Connection scope: Bluetooth. Symptom: An option or codec is missing.

This is a documented check, not a diagnosis of your equipment. The model name does not confirm the selected input, mode, software or connected partner.

If your exact model or a required setting is unknown, use the “I don’t know” branch below. Do not apply a similarly named model’s instructions.

Checks and possible outcomes

Start at platform. Follow the link that matches what you actually observe. Alternative branches are not a single sequence of actions.

platform

Is the source a confirmed LDAC-compatible Android 8.0-or-later device?

Do not infer LDAC support from Android version alone; the source must actually support it. iPhone is outside this procedure.

Look for: Choose only what you can confirm.

  • Manufacturer-documented soundcore Motion 300 official support ↗LDAC requirements and Sound Mode — LDAC requires a compatible Android 8.0-or-later device and is unavailable on iPhone. In soundcore use Settings > Sound Mode > Preferred Audio Quality (LDAC). Codec switching takes about ten seconds; a firmware update may be offered. It increases power consumption.Exact Motion 300. · Source checked 2026-11-09

app

Open this speaker in the soundcore app

Use its already-connected exact-model page.

Look for: Complete this one check and observe its actual response.

  • Manufacturer-documented soundcore Motion 300 official support ↗LDAC requirements and Sound Mode — LDAC requires a compatible Android 8.0-or-later device and is unavailable on iPhone. In soundcore use Settings > Sound Mode > Preferred Audio Quality (LDAC). Codec switching takes about ten seconds; a firmware update may be offered. It increases power consumption.Exact Motion 300. · Source checked 2026-11-09

mode

Open Settings, then Sound Mode

Navigate to the documented sound-mode page without changing a codec yet.

Look for: Complete this one check and observe its actual response.

  • Manufacturer-documented soundcore Motion 300 official support ↗LDAC requirements and Sound Mode — LDAC requires a compatible Android 8.0-or-later device and is unavailable on iPhone. In soundcore use Settings > Sound Mode > Preferred Audio Quality (LDAC). Codec switching takes about ten seconds; a firmware update may be offered. It increases power consumption.Exact Motion 300. · Source checked 2026-11-09

available

Is Preferred Audio Quality (LDAC) actually available?

If the app instead requires a firmware update, stop to prepare that separately; do not start it here.

Look for: Choose only what you can confirm.

  • Manufacturer-documented soundcore Motion 300 official support ↗LDAC requirements and Sound Mode — LDAC requires a compatible Android 8.0-or-later device and is unavailable on iPhone. In soundcore use Settings > Sound Mode > Preferred Audio Quality (LDAC). Codec switching takes about ten seconds; a firmware update may be offered. It increases power consumption.Exact Motion 300. · Source checked 2026-11-09

accept

Do you accept a brief codec change and increased power use?

The documented change takes about ten seconds and reduces battery playtime. Do not change it during an important call or performance.

Look for: Choose only what you can confirm.

  • Manufacturer-documented soundcore Motion 300 official support ↗LDAC requirements and Sound Mode — LDAC requires a compatible Android 8.0-or-later device and is unavailable on iPhone. In soundcore use Settings > Sound Mode > Preferred Audio Quality (LDAC). Codec switching takes about ten seconds; a firmware update may be offered. It increases power consumption.Exact Motion 300. · Source checked 2026-11-09

select

Choose Preferred Audio Quality (LDAC)

Use only the visible documented option and wait for the codec change without repeated toggles.

Look for: Complete this one check and observe its actual response.

  • Manufacturer-documented soundcore Motion 300 official support ↗LDAC requirements and Sound Mode — LDAC requires a compatible Android 8.0-or-later device and is unavailable on iPhone. In soundcore use Settings > Sound Mode > Preferred Audio Quality (LDAC). Codec switching takes about ten seconds; a firmware update may be offered. It increases power consumption.Exact Motion 300. · Source checked 2026-11-09

result

Can you confirm the resulting codec setting?

Read the actual setting; selecting the option is not a measured audio-quality result.

Look for: Choose only what you can confirm.

  • Manufacturer-documented soundcore Motion 300 official support ↗LDAC requirements and Sound Mode — LDAC requires a compatible Android 8.0-or-later device and is unavailable on iPhone. In soundcore use Settings > Sound Mode > Preferred Audio Quality (LDAC). Codec switching takes about ten seconds; a firmware update may be offered. It increases power consumption.Exact Motion 300. · Source checked 2026-11-09

Possible result

Confirm the unknown detail first

Do not infer a setting, gesture, source version or indicator. Consult the exact model documentation before continuing.

insufficient data

Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

    Possible result

    Keep the last observation for support

    These checks do not identify a failed component. Record the exact source, software and last observed response for manufacturer support. Do not clear pairings or repeatedly reset the product.

    next support

    Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

      Possible result

      Checks completed — record the observed result

      Completion records the observation in this setup; it is not a guarantee that the original symptom is resolved. No Audio Review physical test or measured performance is claimed.

      steps completed

      Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

        All Audio Fix guides → · TV & Audio Finder →

        Scroll to Top