Audio Fix / setup help

Sony PS-LX5BT: Match the output switch to an existing line input

Sony PS-LX5BT — Match the output switch to an existing line input. Follow the exact documented route and keep the actual result.

Manufacturer-documented Reviewed 2026-11-09 · Revision 1

Follow these checks in Audio Fix →

When this guide applies

Exact Sony PS-LX5BT. No cable changes, turntable stopped, arm returned and amplifier off before switch correction. Only normal external user controls; no mains modification, chassis opening, reset or firmware installation.

Connection scope: Analog line / headphone audio · Turntable / phono audio. Symptom: Sound goes to the wrong output.

This is a documented check, not a diagnosis of your equipment. The model name does not confirm the selected input, mode, software or connected partner.

If your exact model or a required setting is unknown, use the “I don’t know” branch below. Do not apply a similarly named model’s instructions.

Checks and possible outcomes

Start at scope. Follow the link that matches what you actually observe. Alternative branches are not a single sequence of actions.

scope

Confirm the exact setup

Is the existing cable connected to a confirmed LINE/AUX input, with OUTPUT SELECT mistakenly on PHONO, the turntable stopped and amplifier off?

Look for: Choose only a detail you can confirm.

  • Manufacturer-documented Sony PS-LX5BT / PS-LX3BT Operating Instructions 5-069-872-13(1) ↗Connecting your Turntable, PDF p1 — OUTPUT SELECT must match the destination: PHONO bypasses the internal equalizer for phono input; LINE uses the internal equalizer for line/AUX input. LINE into PHONO can damage amplifier or speakers. Do not move rear switches during playback.Exact PS-LX5BT, model YY2098C. Regional manual for Americas/Oceania/Asia; not PS-LX310BT. · Source checked 2026-11-09

a1

Read the destination label

Confirm the actual destination is LINE/AUX rather than PHONO. If it is unclear, stop.

Look for: Perform this one check and observe the actual response.

  • Manufacturer-documented Sony PS-LX5BT / PS-LX3BT Operating Instructions 5-069-872-13(1) ↗Connecting your Turntable, PDF p1 — OUTPUT SELECT must match the destination: PHONO bypasses the internal equalizer for phono input; LINE uses the internal equalizer for line/AUX input. LINE into PHONO can damage amplifier or speakers. Do not move rear switches during playback.Exact PS-LX5BT, model YY2098C. Regional manual for Americas/Oceania/Asia; not PS-LX310BT. · Source checked 2026-11-09

a2

Correct the output selector

Set OUTPUT SELECT to LINE only for that confirmed line input. Do not move the switch during playback.

Look for: Perform this one check and observe the actual response.

  • Manufacturer-documented Sony PS-LX5BT / PS-LX3BT Operating Instructions 5-069-872-13(1) ↗Connecting your Turntable, PDF p1 — OUTPUT SELECT must match the destination: PHONO bypasses the internal equalizer for phono input; LINE uses the internal equalizer for line/AUX input. LINE into PHONO can damage amplifier or speakers. Do not move rear switches during playback.Exact PS-LX5BT, model YY2098C. Regional manual for Americas/Oceania/Asia; not PS-LX310BT. · Source checked 2026-11-09

result

Check the actual result

Does the output selector now match the documented line-input route?

Look for: Choose only a detail you can confirm.

  • Manufacturer-documented Sony PS-LX5BT / PS-LX3BT Operating Instructions 5-069-872-13(1) ↗Connecting your Turntable, PDF p1 — OUTPUT SELECT must match the destination: PHONO bypasses the internal equalizer for phono input; LINE uses the internal equalizer for line/AUX input. LINE into PHONO can damage amplifier or speakers. Do not move rear switches during playback.Exact PS-LX5BT, model YY2098C. Regional manual for Americas/Oceania/Asia; not PS-LX310BT. · Source checked 2026-11-09

Possible result

Confirm the unknown detail first

Do not infer a source setting, installed cartridge, connector role, software state or partner capability. Obtain the exact documentation before continuing.

insufficient data

Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

    Possible result

    Keep the actual observation for support

    Record the exact model, source, input and last observed response. These checks do not diagnose a failed component. No reset, service work or blind update is prescribed.

    next support

    Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

      Possible result

      Checks completed — keep the observed result

      This records the observation in this particular setup, not a guaranteed cure, physical Audio Review test or measurement.

      steps completed

      Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

        All Audio Fix guides → · TV & Audio Finder →

        Scroll to Top