Audio Fix / setup help
Sennheiser Accentum True Wireless: check call connection and phone output
Sennheiser Accentum True Wireless — Check call connection and phone output. Follow the exact-model instructions and confirm the result.
Manufacturer-documented Reviewed 2026-11-09 · Revision 1
Follow these checks in Audio Fix →When this guide applies
Exact Accentum True Wireless with a Bluetooth source. The phone call is not audible in the earbuds; this does not disable other microphones or change codecs. Reversible checks only; no factory reset or pairing-list deletion.
Connection scope: Bluetooth. Symptom: Sound changes during calls.
This is a documented check, not a diagnosis of your equipment. The model name does not confirm the selected input, mode, software or connected partner.
If your exact model or a required setting is unknown, use the “I don’t know” branch below. Do not apply a similarly named model’s instructions.
Checks and possible outcomes
Start at scope. Follow the link that matches what you actually observe. Alternative branches are not a single sequence of actions.
scope
Confirm the setup
The phone call is not audible in the earbuds; this does not disable other microphones or change codecs.
Look for: Confirm this setup before changing anything.
- If This describes my setup → Check the call connection
- If My setup differs → Use model and source support
- If I do not know / cannot check → More information is needed
- Manufacturer-documented Accentum True Wireless official instructions ↗No sound; charging; comfortable volume; Windows calls — Charge/contact checks, media/call connection, independent source volume, fit test and Windows microphone selection are documented.Exact Accentum True Wireless. ATW1 earbuds, not ACCENTUM over-ear. Historical Windows profile names may differ on newer systems. · Source checked 2026-11-09
a1
Check the call connection
In source Bluetooth settings, verify the call connection for ACCENTUM TW if the source exposes that control.
Look for: Observe the stated control or indication.
- If I completed this check → Select headphone call output
- If I could not complete it → Use model and source support
- If I do not know / cannot check → More information is needed
- Manufacturer-documented Accentum True Wireless official instructions ↗No sound; charging; comfortable volume; Windows calls — Charge/contact checks, media/call connection, independent source volume, fit test and Windows microphone selection are documented.Exact Accentum True Wireless. ATW1 earbuds, not ACCENTUM over-ear. Historical Windows profile names may differ on newer systems. · Source checked 2026-11-09
a2
Select headphone call output
During the intended phone call choose the earbuds as audio output.
Look for: Observe the stated control or indication.
- If I completed this check → Set a comfortable call level
- If I could not complete it → Use model and source support
- If I do not know / cannot check → More information is needed
- Manufacturer-documented Accentum True Wireless official instructions ↗No sound; charging; comfortable volume; Windows calls — Charge/contact checks, media/call connection, independent source volume, fit test and Windows microphone selection are documented.Exact Accentum True Wireless. ATW1 earbuds, not ACCENTUM over-ear. Historical Windows profile names may differ on newer systems. · Source checked 2026-11-09
a3
Set a comfortable call level
Adjust the source call volume gently.
Look for: Observe the stated control or indication.
- If I completed this check → Check the result
- If I could not complete it → Use model and source support
- If I do not know / cannot check → More information is needed
- Manufacturer-documented Accentum True Wireless official instructions ↗No sound; charging; comfortable volume; Windows calls — Charge/contact checks, media/call connection, independent source volume, fit test and Windows microphone selection are documented.Exact Accentum True Wireless. ATW1 earbuds, not ACCENTUM over-ear. Historical Windows profile names may differ on newer systems. · Source checked 2026-11-09
observe
Check the result
Can you hear the remote participant through the earbuds?
Look for: Report the observation; completing steps does not establish a repair.
- If The expected result is present → Checks completed
- If The problem remains → Use model and source support
- If I do not know / cannot check → More information is needed
- Manufacturer-documented Accentum True Wireless official instructions ↗No sound; charging; comfortable volume; Windows calls — Charge/contact checks, media/call connection, independent source volume, fit test and Windows microphone selection are documented.Exact Accentum True Wireless. ATW1 earbuds, not ACCENTUM over-ear. Historical Windows profile names may differ on newer systems. · Source checked 2026-11-09
Possible result
More information is needed
No diagnosis follows from an unknown answer. Record the last visible indication and consult the exact-model instructions or support.
insufficient data
Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.
Possible result
Use model and source support
Keep the symptom and last observed step. Do not clear pairings or reset settings on the basis of this guide.
next support
Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.
Possible result
Checks completed
You confirmed the requested observation in this setup. This is not a laboratory test or a promise about other apps and sources.
steps completed
Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.