Audio Fix / setup help

Rega Planar 6: select the record’s normal 33⅓ or 45 rpm speed

Rega Planar 6 — select the record’s normal 33⅓ or 45 rpm speed. Follow the exact documented route and keep the actual result.

Manufacturer-documented Reviewed 2026-11-09 · Revision 1

Follow these checks in Audio Fix →

When this guide applies

Exact Rega Planar 6. Known supplied Neo already connected; rear calibration controls are excluded. Only normal external user controls; no mains modification, chassis opening, reset or firmware installation.

Connection scope: Turntable / phono audio. Symptom: The record plays at the wrong speed.

This is a documented check, not a diagnosis of your equipment. The model name does not confirm the selected input, mode, software or connected partner.

If your exact model or a required setting is unknown, use the “I don’t know” branch below. Do not apply a similarly named model’s instructions.

Checks and possible outcomes

Start at scope. Follow the link that matches what you actually observe. Alternative branches are not a single sequence of actions.

scope

Confirm the exact setup

The supplied power supply is already correctly connected and on, the record speed is known, the arm is lifted and you accept changing platter speed.

Look for: Choose only a detail you can confirm.

  • Manufacturer-documented Rega Planar 6 official user manual ↗English pp.1–3 — Normal speed selection — The Neo front 33/45 button changes normal speed; the Rega logo is red for 33⅓ and green for 45. Rear programme/adjustment controls are for calibration.Exact Rega Planar 6 with RB330. Cartridge and power-supply variant must be confirmed; this is not a different Planar edition. · Source checked 2026-11-09

a1

Read the intended record speed

Use its actual 33⅓ or 45 rpm marking. Do not infer speed from record size.

Look for: Perform this one check and observe the actual response.

  • Manufacturer-documented Rega Planar 6 official user manual ↗English pp.1–3 — Normal speed selection — The Neo front 33/45 button changes normal speed; the Rega logo is red for 33⅓ and green for 45. Rear programme/adjustment controls are for calibration.Exact Rega Planar 6 with RB330. Cartridge and power-supply variant must be confirmed; this is not a different Planar edition. · Source checked 2026-11-09

a2

Compare the illuminated Rega-logo colour

Red means 33⅓ and green means 45 rpm.

Look for: Perform this one check and observe the actual response.

  • Manufacturer-documented Rega Planar 6 official user manual ↗English pp.1–3 — Normal speed selection — The Neo front 33/45 button changes normal speed; the Rega logo is red for 33⅓ and green for 45. Rear programme/adjustment controls are for calibration.Exact Rega Planar 6 with RB330. Cartridge and power-supply variant must be confirmed; this is not a different Planar edition. · Source checked 2026-11-09

a3

Select only the needed normal speed

If the current colour is wrong, press the front 33/45 button once. If already correct, leave it unchanged.

Look for: Perform this one check and observe the actual response.

  • Manufacturer-documented Rega Planar 6 official user manual ↗English pp.1–3 — Normal speed selection — The Neo front 33/45 button changes normal speed; the Rega logo is red for 33⅓ and green for 45. Rear programme/adjustment controls are for calibration.Exact Rega Planar 6 with RB330. Cartridge and power-supply variant must be confirmed; this is not a different Planar edition. · Source checked 2026-11-09

result

Check the actual result

Is the intended normal speed selected?

Look for: Choose only a detail you can confirm.

  • Manufacturer-documented Rega Planar 6 official user manual ↗English pp.1–3 — Normal speed selection — The Neo front 33/45 button changes normal speed; the Rega logo is red for 33⅓ and green for 45. Rear programme/adjustment controls are for calibration.Exact Rega Planar 6 with RB330. Cartridge and power-supply variant must be confirmed; this is not a different Planar edition. · Source checked 2026-11-09

Possible result

Confirm the unknown detail first

Do not infer a source setting, installed cartridge, connector role, software state or partner capability. Obtain the exact documentation before continuing.

insufficient data

Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

    Possible result

    Keep the actual observation for support

    Record the exact model, source, input and last observed response. These checks do not diagnose a failed component. No reset, service work or blind update is prescribed.

    next support

    Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

      Possible result

      Checks completed — keep the observed result

      This records the observation in this particular setup, not a guaranteed cure, physical Audio Review test or measurement.

      steps completed

      Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

        All Audio Fix guides → · TV & Audio Finder →

        Scroll to Top