Audio Fix / setup help
Nothing Headphone (1): remove the wired-audio priority before returning to Bluetooth
Nothing Headphone (1) — remove the wired-audio priority before returning to Bluetooth. Use the stated exact hardware and connection scope.
Manufacturer-documented Reviewed 2026-11-09 · Revision 1
Follow these checks in Audio Fix →When this guide applies
Exact Nothing Headphone (1). Exact original Nothing Headphone (1) is powered on and has an audio cable inserted. You want an existing Bluetooth source instead, but wired-audio priority is currently active. No call or firmware transfer is active.
Connection scope: Bluetooth. Symptom: Sound goes to the wrong output.
This is a documented check, not a diagnosis of your equipment. The model name does not confirm the selected input, mode, software or connected partner.
If your exact model or a required setting is unknown, use the “I don’t know” branch below. Do not apply a similarly named model’s instructions.
Checks and possible outcomes
Start at scope. Follow the link that matches what you actually observe. Alternative branches are not a single sequence of actions.
scope
Confirm the model and connection
Exact original Nothing Headphone (1) is powered on and has an audio cable inserted. You want an existing Bluetooth source instead, but wired-audio priority is currently active. No call or firmware transfer is active.
Look for: Confirm this exact setup and observation before continuing.
- If Yes, I confirm → Accept the wired audio interruption
- If No / my setup differs → Continue with source and model support
- If I cannot confirm → More information is required
- Manufacturer-documented Nothing Headphone (1) — official headphone1 power switch 25 ↗ON/OFF Switch, exact Headphone (1) how-to section — The original Headphone (1) uses a physical ON/OFF switch: up is off and down is on. Its separate pairing button is not the power control.Exact Nothing Headphone (1). · Source checked 2026-11-09
- Manufacturer-documented Nothing Headphone (1) — official headphone1 wired bt priority 25 ↗Original Headphone (1) wired audio priority — On the original Headphone (1), detection of a USB-C or AUX audio cable disconnects wireless Bluetooth audio. The manufacturer says to unplug the wired cable to use Bluetooth audio again.Exact Nothing Headphone (1). · Source checked 2026-11-09
consent
Accept the wired audio interruption
Unplugging the audio cable interrupts its wired media route. Do you accept this change to return to the already paired Bluetooth source?
Look for: Explicit informed acceptance is required before the next action.
- If I accept these effects → Pause the current audio
- If No / leave this unchanged → Continue with source and model support
- If I cannot confirm → More information is required
- Manufacturer-documented Nothing Headphone (1) — official headphone1 power switch 25 ↗ON/OFF Switch, exact Headphone (1) how-to section — The original Headphone (1) uses a physical ON/OFF switch: up is off and down is on. Its separate pairing button is not the power control.Exact Nothing Headphone (1). · Source checked 2026-11-09
- Manufacturer-documented Nothing Headphone (1) — official headphone1 wired bt priority 25 ↗Original Headphone (1) wired audio priority — On the original Headphone (1), detection of a USB-C or AUX audio cable disconnects wireless Bluetooth audio. The manufacturer says to unplug the wired cable to use Bluetooth audio again.Exact Nothing Headphone (1). · Source checked 2026-11-09
a1
Pause the current audio
Pause the current wired and intended Bluetooth sources and keep the intended media level quiet.
Look for: Observe the named indication or available control; stop if absent.
- If I completed this check → Remove the headphone audio cable
- If I cannot complete this → Continue with source and model support
- If I cannot determine this → More information is required
- Manufacturer-documented Nothing Headphone (1) — official headphone1 power switch 25 ↗ON/OFF Switch, exact Headphone (1) how-to section — The original Headphone (1) uses a physical ON/OFF switch: up is off and down is on. Its separate pairing button is not the power control.Exact Nothing Headphone (1). · Source checked 2026-11-09
- Manufacturer-documented Nothing Headphone (1) — official headphone1 wired bt priority 25 ↗Original Headphone (1) wired audio priority — On the original Headphone (1), detection of a USB-C or AUX audio cable disconnects wireless Bluetooth audio. The manufacturer says to unplug the wired cable to use Bluetooth audio again.Exact Nothing Headphone (1). · Source checked 2026-11-09
a2
Remove the headphone audio cable
Unplug the existing USB-C audio or 3.5 mm AUX audio cable from the Headphone (1). Do not change any mains or amplifier connections.
Look for: Observe the named indication or available control; stop if absent.
- If I completed this check → Reconnect the existing Bluetooth record
- If I cannot complete this → Continue with source and model support
- If I cannot determine this → More information is required
- Manufacturer-documented Nothing Headphone (1) — official headphone1 power switch 25 ↗ON/OFF Switch, exact Headphone (1) how-to section — The original Headphone (1) uses a physical ON/OFF switch: up is off and down is on. Its separate pairing button is not the power control.Exact Nothing Headphone (1). · Source checked 2026-11-09
- Manufacturer-documented Nothing Headphone (1) — official headphone1 wired bt priority 25 ↗Original Headphone (1) wired audio priority — On the original Headphone (1), detection of a USB-C or AUX audio cable disconnects wireless Bluetooth audio. The manufacturer says to unplug the wired cable to use Bluetooth audio again.Exact Nothing Headphone (1). · Source checked 2026-11-09
a3
Reconnect the existing Bluetooth record
With the headset already powered on, select its existing record on the intended previously paired phone if it has not reconnected automatically.
Look for: Observe the named indication or available control; stop if absent.
- If I completed this check → Resume the intended phone media
- If I cannot complete this → Continue with source and model support
- If I cannot determine this → More information is required
- Manufacturer-documented Nothing Headphone (1) — official headphone1 power switch 25 ↗ON/OFF Switch, exact Headphone (1) how-to section — The original Headphone (1) uses a physical ON/OFF switch: up is off and down is on. Its separate pairing button is not the power control.Exact Nothing Headphone (1). · Source checked 2026-11-09
- Manufacturer-documented Nothing Headphone (1) — official headphone1 wired bt priority 25 ↗Original Headphone (1) wired audio priority — On the original Headphone (1), detection of a USB-C or AUX audio cable disconnects wireless Bluetooth audio. The manufacturer says to unplug the wired cable to use Bluetooth audio again.Exact Nothing Headphone (1). · Source checked 2026-11-09
a4
Resume the intended phone media
Play the familiar passage from that phone at the prior quiet level.
Look for: Observe the named indication or available control; stop if absent.
- If I completed this check → Check the result
- If I cannot complete this → Continue with source and model support
- If I cannot determine this → More information is required
- Manufacturer-documented Nothing Headphone (1) — official headphone1 power switch 25 ↗ON/OFF Switch, exact Headphone (1) how-to section — The original Headphone (1) uses a physical ON/OFF switch: up is off and down is on. Its separate pairing button is not the power control.Exact Nothing Headphone (1). · Source checked 2026-11-09
- Manufacturer-documented Nothing Headphone (1) — official headphone1 wired bt priority 25 ↗Original Headphone (1) wired audio priority — On the original Headphone (1), detection of a USB-C or AUX audio cable disconnects wireless Bluetooth audio. The manufacturer says to unplug the wired cable to use Bluetooth audio again.Exact Nothing Headphone (1). · Source checked 2026-11-09
observe
Check the result
Does the intended previously paired phone now play through the headset over Bluetooth?
Look for: Confirm this exact setup and observation before continuing.
- If Yes, I confirm → Checks completed
- If No / my setup differs → Continue with source and model support
- If I cannot confirm → More information is required
- Manufacturer-documented Nothing Headphone (1) — official headphone1 power switch 25 ↗ON/OFF Switch, exact Headphone (1) how-to section — The original Headphone (1) uses a physical ON/OFF switch: up is off and down is on. Its separate pairing button is not the power control.Exact Nothing Headphone (1). · Source checked 2026-11-09
- Manufacturer-documented Nothing Headphone (1) — official headphone1 wired bt priority 25 ↗Original Headphone (1) wired audio priority — On the original Headphone (1), detection of a USB-C or AUX audio cable disconnects wireless Bluetooth audio. The manufacturer says to unplug the wired cable to use Bluetooth audio again.Exact Nothing Headphone (1). · Source checked 2026-11-09
Possible result
More information is required
An unknown state is not a diagnosis. Record the last visible indication and consult the exact model instructions.
insufficient data
Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.
Possible result
Continue with source and model support
Keep the source, connection and last observation. Do not reset, open equipment or change full-scale output to compensate for an unconfirmed result.
next support
Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.
Possible result
Checks completed
The requested observation was confirmed in this setup. It does not establish a hardware repair or guarantee another source behaves the same.
steps completed
Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.