Audio Fix / setup help
Nothing Ear (3): check two-source media priority
Nothing Ear (3): check two-source media priority. Use the observations to distinguish a documented setting from an unresolved symptom.
Manufacturer-documented Reviewed 2026-11-09 · Revision 1
Follow these checks in Audio Fix →When this guide applies
Two live Bluetooth connections, with no active call. This controls source choice rather than diagnosing a connection fault.
Connection scope: Bluetooth. Symptom: Switching between devices isn’t working.
This is a documented check, not a diagnosis of your equipment. The model name does not confirm the selected input, mode, software or connected partner.
If your exact model or a required setting is unknown, use the “I don’t know” branch below. Do not apply a similarly named model’s instructions.
Checks and possible outcomes
Start at check-0. Follow the link that matches what you actually observe. Alternative branches are not a single sequence of actions.
check-0
Are the two intended sources connected?
Confirm both in their Bluetooth interfaces rather than only saved pairings.
Look for: Confirm the stated observation; do not infer an unavailable detail.
- If Yes / this check is completed → Are both sources free of an active call?
- If No / the check cannot be completed → Keep the last observation for support
- If I do not know / cannot check → An observation is still unknown
- Manufacturer-documented Nothing Ear (3) — two-source audio ↗Media priority — The first media source retains audio; starting media on the other source does not seize it. Calls override media.Exact Nothing Ear (3) support section reviewed to establish article applicability. No similarly named Nothing/CMF generation is substituted. · Source checked 2026-11-09
check-1
Are both sources free of an active call?
Calls take priority; finish them when convenient before a media-only comparison.
Look for: Confirm the stated observation; do not infer an unavailable detail.
- If Yes / this check is completed → Pause the first source’s media
- If No / the check cannot be completed → Keep the last observation for support
- If I do not know / cannot check → An observation is still unknown
- Manufacturer-documented Nothing Ear (3) — two-source audio ↗Media priority — The first media source retains audio; starting media on the other source does not seize it. Calls override media.Exact Nothing Ear (3) support section reviewed to establish article applicability. No similarly named Nothing/CMF generation is substituted. · Source checked 2026-11-09
check-2
Pause the first source’s media
Stop its current music/video so both sources are idle before the other begins.
Look for: Perform only this check, then choose whether it could be completed.
- If Yes / this check is completed → Does the intended source now take playback?
- If No / the check cannot be completed → Keep the last observation for support
- If I do not know / cannot check → An observation is still unknown
- Manufacturer-documented Nothing Ear (3) — two-source audio ↗Media priority — The first media source retains audio; starting media on the other source does not seize it. Calls override media.Exact Nothing Ear (3) support section reviewed to establish article applicability. No similarly named Nothing/CMF generation is substituted. · Source checked 2026-11-09
check-3
Does the intended source now take playback?
Start media only on the desired source. Starting the second stream while the first plays does not itself switch the audio channel.
Look for: Confirm the stated observation; do not infer an unavailable detail.
- If Yes / this check is completed → Checks completed — report your actual outcome
- If No / the check cannot be completed → Keep the last observation for support
- If I do not know / cannot check → An observation is still unknown
- Manufacturer-documented Nothing Ear (3) — two-source audio ↗Media priority — The first media source retains audio; starting media on the other source does not seize it. Calls override media.Exact Nothing Ear (3) support section reviewed to establish article applicability. No similarly named Nothing/CMF generation is substituted. · Source checked 2026-11-09
Possible result
An observation is still unknown
Check the exact model and linked instructions before continuing. An unknown setting or response is not evidence of a fault.
insufficient data
Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.
Possible result
Keep the last observation for support
These checks have not established a working setup. Contact manufacturer support with the exact source, software and last observed response. No hardware or firmware fault is diagnosed.
next support
Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.
Possible result
Checks completed — report your actual outcome
Completion does not automatically mean the original problem is solved. Report whether these checks solved, partly helped or did not help your setup. No Audio Review physical test is claimed.
steps completed
Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.