Audio Fix / setup help

NAD C 700 V2: Select an already connected source from the front menu

NAD C 700 V2 — Select an already connected source from the front menu. Follow the exact documented route and keep the actual result.

Manufacturer-documented Reviewed 2026-11-09 · Revision 1

Follow these checks in Audio Fix →

When this guide applies

Exact NAD C 700 V2. No new connection, reconfiguration or input renaming; user knows the intended existing source. Only normal external user controls; no mains modification, chassis opening, reset or firmware installation.

Connection scope: HDMI / ARC / eARC audio · Optical digital audio · Analog line / headphone audio · Turntable / phono audio · Wi-Fi / Ethernet network audio. Symptom: Switching between devices isn’t working.

This is a documented check, not a diagnosis of your equipment. The model name does not confirm the selected input, mode, software or connected partner.

If your exact model or a required setting is unknown, use the “I don’t know” branch below. Do not apply a similarly named model’s instructions.

Checks and possible outcomes

Start at scope. Follow the link that matches what you actually observe. Alternative branches are not a single sequence of actions.

scope

Confirm the exact setup

Is the intended source already connected/configured and clearly identified, with playback paused, volume low and permission to switch away from the present source?

Look for: Choose only a detail you can confirm.

  • Manufacturer-documented NAD C 700 V2 Owner’s Manual, English EN-13 ↗Setup menu navigation / Sources, PDF p11 — Hold VOLUME-MENU until Sources, My Presets and Settings appear; Sources selects the source to access/play. Rotate to navigate and press the knob to select.Exact C 700 V2, not original C700 or M10. Use only visibly matching installed menu controls. · Source checked 2026-11-09

a1

Open Sources on the front panel

Hold VOLUME-MENU until the setup menu appears, then use its documented navigation to open Sources.

Look for: Perform this one check and observe the actual response.

  • Manufacturer-documented NAD C 700 V2 Owner’s Manual, English EN-13 ↗Setup menu navigation / Sources, PDF p11 — Hold VOLUME-MENU until Sources, My Presets and Settings appear; Sources selects the source to access/play. Rotate to navigate and press the knob to select.Exact C 700 V2, not original C700 or M10. Use only visibly matching installed menu controls. · Source checked 2026-11-09

a2

Select the intended existing source

Rotate to the positively identified existing source and press VOLUME-MENU to select it. Stop if it is hidden or unavailable.

Look for: Perform this one check and observe the actual response.

  • Manufacturer-documented NAD C 700 V2 Owner’s Manual, English EN-13 ↗Setup menu navigation / Sources, PDF p11 — Hold VOLUME-MENU until Sources, My Presets and Settings appear; Sources selects the source to access/play. Rotate to navigate and press the knob to select.Exact C 700 V2, not original C700 or M10. Use only visibly matching installed menu controls. · Source checked 2026-11-09

result

Check the actual result

Does the front display identify the intended current source?

Look for: Choose only a detail you can confirm.

  • Manufacturer-documented NAD C 700 V2 Owner’s Manual, English EN-13 ↗Setup menu navigation / Sources, PDF p11 — Hold VOLUME-MENU until Sources, My Presets and Settings appear; Sources selects the source to access/play. Rotate to navigate and press the knob to select.Exact C 700 V2, not original C700 or M10. Use only visibly matching installed menu controls. · Source checked 2026-11-09

Possible result

Confirm the unknown detail first

Do not infer a source setting, installed cartridge, connector role, software state or partner capability. Obtain the exact documentation before continuing.

insufficient data

Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

    Possible result

    Keep the actual observation for support

    Record the exact model, source, input and last observed response. These checks do not diagnose a failed component. No reset, service work or blind update is prescribed.

    next support

    Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

      Possible result

      Checks completed — keep the observed result

      This records the observation in this particular setup, not a guaranteed cure, physical Audio Review test or measurement.

      steps completed

      Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

        All Audio Fix guides → · TV & Audio Finder →

        Scroll to Top