Audio Fix / setup help

LG S90TR: check Bluetooth status using the Information control

LG S90TR: check Bluetooth status using the Information control. Observe the actual response before reporting an outcome.

Manufacturer-documented Reviewed 2026-11-09 · Revision 1

Follow these checks in Audio Fix →

When this guide applies

Supplied remote status response, with voice feedback already available.

Connection scope: Bluetooth. Symptom: Buttons, touch controls or wear detection aren’t working.

This is a documented check, not a diagnosis of your equipment. The model name does not confirm the selected input, mode, software or connected partner.

If your exact model or a required setting is unknown, use the “I don’t know” branch below. Do not apply a similarly named model’s instructions.

Checks and possible outcomes

Start at step-0. Follow the link that matches what you actually observe. Alternative branches are not a single sequence of actions.

step-0

Is this the supplied LG soundbar remote?

A TV remote and channel-tuning controls are different paths.

Look for: Confirm the stated prerequisite or observation; unknown is not a fault diagnosis.

  • Manufacturer-documented LG S90TR official web manual ↗Exploring Remote Control — Remote controls include volume, Bluetooth pairing, Function and Information; a short Information press reports Paired on an active Bluetooth input.Exact supplied remote; long Information holds and TV controls are outside this check. · Source checked 2026-11-09
  • Manufacturer-documented LG S90TR official web manual ↗Front > Power, Function, Volume — A short Power press changes power; a hold over three seconds disconnects WiFi and stops sound. Function selects the input.Normal external operation only; no enclosure opening or long power hold. · Source checked 2026-11-09

step-1

Is the Bluetooth function selected?

Inspect the current input rather than assume the last-used mode.

Look for: Confirm the stated prerequisite or observation; unknown is not a fault diagnosis.

  • Manufacturer-documented LG S90TR official web manual ↗Exploring Remote Control — Remote controls include volume, Bluetooth pairing, Function and Information; a short Information press reports Paired on an active Bluetooth input.Exact supplied remote; long Information holds and TV controls are outside this check. · Source checked 2026-11-09
  • Manufacturer-documented LG S90TR official web manual ↗Front > Power, Function, Volume — A short Power press changes power; a hold over three seconds disconnects WiFi and stops sound. Function selects the input.Normal external operation only; no enclosure opening or long power hold. · Source checked 2026-11-09

step-2

Briefly press Information

Use a short press; holding longer than five seconds changes voice-feedback settings and is outside this flow.

Look for: Perform only the stated check, then confirm whether it could be completed.

  • Manufacturer-documented LG S90TR official web manual ↗Exploring Remote Control — Remote controls include volume, Bluetooth pairing, Function and Information; a short Information press reports Paired on an active Bluetooth input.Exact supplied remote; long Information holds and TV controls are outside this check. · Source checked 2026-11-09
  • Manufacturer-documented LG S90TR official web manual ↗Front > Power, Function, Volume — A short Power press changes power; a hold over three seconds disconnects WiFi and stops sound. Function selects the input.Normal external operation only; no enclosure opening or long power hold. · Source checked 2026-11-09

step-3

Does it report Paired for a connected source?

If voice feedback is disabled or cannot be heard, use unknown; silence is not proof of failed Bluetooth.

Look for: Confirm the stated prerequisite or observation; unknown is not a fault diagnosis.

  • Manufacturer-documented LG S90TR official web manual ↗Exploring Remote Control — Remote controls include volume, Bluetooth pairing, Function and Information; a short Information press reports Paired on an active Bluetooth input.Exact supplied remote; long Information holds and TV controls are outside this check. · Source checked 2026-11-09
  • Manufacturer-documented LG S90TR official web manual ↗Front > Power, Function, Volume — A short Power press changes power; a hold over three seconds disconnects WiFi and stops sound. Function selects the input.Normal external operation only; no enclosure opening or long power hold. · Source checked 2026-11-09

Possible result

Checks completed — report your outcome

Completion does not automatically mean solved. Report what actually happened: solved, partly helped, did not help or could not follow. No Audio Review physical test is claimed.

steps completed

Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

    Possible result

    Keep the observation for manufacturer support

    These steps did not establish a working setup. Keep the exact model, source, software and last observed response for support. No hardware or firmware defect is diagnosed.

    next support

    Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

      Possible result

      A required observation is unknown

      Confirm the exact model and linked instructions before continuing. Do not guess the state of a control, connection or update.

      insufficient data

      Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

        All Audio Fix guides → · TV & Audio Finder →

        Scroll to Top