Audio Fix / setup help
Bowers & Wilkins Px8 S2: enter the correct Bluetooth discovery mode
Bowers & Wilkins Px8 S2 — Px8 S2: enter the correct Bluetooth discovery mode. Use the observations to distinguish a documented setting from an unresolved symptom.
Manufacturer-documented Reviewed 2026-11-09 · Revision 1
Follow these checks in Audio Fix →When this guide applies
Manual Bluetooth discovery with charged Px8 S2 and a nearby source. No factory reset or stored-pairing deletion.
Connection scope: Bluetooth. Symptom: My devices won’t pair or reconnect.
This is a documented check, not a diagnosis of your equipment. The model name does not confirm the selected input, mode, software or connected partner.
If your exact model or a required setting is unknown, use the “I don’t know” branch below. Do not apply a similarly named model’s instructions.
Checks and possible outcomes
Start at check-0. Follow the link that matches what you actually observe. Alternative branches are not a single sequence of actions.
check-0
Is the exact model charged and available?
Confirm Px8 S2 on the product rather than a nearby generation.
Look for: Confirm the stated observation; do not infer an unavailable detail.
- If Yes / this check is completed → Place the source nearby
- If No / the check cannot be completed → Keep the last observation for support
- If I do not know / cannot check → An observation is still unknown
- Manufacturer-documented Px8 S2 official user manual ↗5.1 Pairing; 5.1.2 source Bluetooth selection — Pairing uses the power slider held uppermost five seconds; blue flashing indicates discovery; select the headphones entry.Exact Px8 S2 generation over Bluetooth; not an older or similarly named Bowers & Wilkins model. · Source checked 2026-11-09
check-1
Place the source nearby
Keep the source within 10 cm with its Bluetooth enabled.
Look for: Perform only this check, then choose whether it could be completed.
- If Yes / this check is completed → Enter manual discovery
- If No / the check cannot be completed → Keep the last observation for support
- If I do not know / cannot check → An observation is still unknown
- Manufacturer-documented Px8 S2 official user manual ↗5.1 Pairing; 5.1.2 source Bluetooth selection — Pairing uses the power slider held uppermost five seconds; blue flashing indicates discovery; select the headphones entry.Exact Px8 S2 generation over Bluetooth; not an older or similarly named Bowers & Wilkins model. · Source checked 2026-11-09
check-2
Enter manual discovery
Hold the power slider in its upper position for five seconds.
Look for: Perform only this check, then choose whether it could be completed.
- If Yes / this check is completed → Does the documented discovery indicator appear?
- If No / the check cannot be completed → Keep the last observation for support
- If I do not know / cannot check → An observation is still unknown
- Manufacturer-documented Px8 S2 official user manual ↗5.1 Pairing; 5.1.2 source Bluetooth selection — Pairing uses the power slider held uppermost five seconds; blue flashing indicates discovery; select the headphones entry.Exact Px8 S2 generation over Bluetooth; not an older or similarly named Bowers & Wilkins model. · Source checked 2026-11-09
check-3
Does the documented discovery indicator appear?
Observe the flashing blue status LED while the headphones are not worn.
Look for: Confirm the stated observation; do not infer an unavailable detail.
- If Yes / this check is completed → Does the source connect the correct audio entry?
- If No / the check cannot be completed → Keep the last observation for support
- If I do not know / cannot check → An observation is still unknown
- Manufacturer-documented Px8 S2 official user manual ↗5.1 Pairing; 5.1.2 source Bluetooth selection — Pairing uses the power slider held uppermost five seconds; blue flashing indicates discovery; select the headphones entry.Exact Px8 S2 generation over Bluetooth; not an older or similarly named Bowers & Wilkins model. · Source checked 2026-11-09
check-4
Does the source connect the correct audio entry?
Choose Px8 S2 in its Bluetooth list, using the headphones icon if multiple entries appear. A discovery light alone is not successful connection.
Look for: Confirm the stated observation; do not infer an unavailable detail.
- If Yes / this check is completed → Checks completed — report your actual outcome
- If No / the check cannot be completed → Keep the last observation for support
- If I do not know / cannot check → An observation is still unknown
- Manufacturer-documented Px8 S2 official user manual ↗5.1 Pairing; 5.1.2 source Bluetooth selection — Pairing uses the power slider held uppermost five seconds; blue flashing indicates discovery; select the headphones entry.Exact Px8 S2 generation over Bluetooth; not an older or similarly named Bowers & Wilkins model. · Source checked 2026-11-09
Possible result
An observation is still unknown
Check the exact model and linked instructions before continuing. An unknown setting or response is not evidence of a fault.
insufficient data
Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.
Possible result
Keep the last observation for support
These checks have not established a working setup. Contact manufacturer support with the exact source, software and last observed response. No hardware or firmware fault is diagnosed.
next support
Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.
Possible result
Checks completed — report your actual outcome
Completion does not automatically mean the original problem is solved. Report whether these checks solved, partly helped or did not help your setup. No Audio Review physical test is claimed.
steps completed
Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.