Audio Fix / setup help

Bluesound NODE N132: restore a deliberately hidden source in BluOS

Bluesound NODE N132 — restore a deliberately hidden source in BluOS. Follow the exact documented route and keep the actual result.

Manufacturer-documented Reviewed 2026-11-09 · Revision 1

Follow these checks in Audio Fix →

When this guide applies

Exact Bluesound NODE N132. Known installed source hidden by its per-input visibility setting. Only normal external user controls; no mains modification, chassis opening, reset or firmware installation.

Connection scope: Device controls / power only. Symptom: An option or codec is missing.

This is a documented check, not a diagnosis of your equipment. The model name does not confirm the selected input, mode, software or connected partner.

If your exact model or a required setting is unknown, use the “I don’t know” branch below. Do not apply a similarly named model’s instructions.

Checks and possible outcomes

Start at scope. Follow the link that matches what you actually observe. Alternative branches are not a single sequence of actions.

scope

Confirm the exact setup

The actual installed input is known, Hide Source for it is positively enabled and the owner accepts showing this input again.

Look for: Choose only a detail you can confirm.

  • Manufacturer-documented Bluesound NODE N132 official documentation ↗Owner’s Manual pp.2–3: network, physical connections and controls — This exact model uses BluOS Controller, wired Ethernet to a home network and external analog/optical inputs. N132 supports external USB Audio2 DAC output selected in Audio Settings, which disables all other analog/digital outputs.Exact Bluesound NODE N132 is a BluOS player. Generic BluOS app procedures are used only for documented player functions; hardware ports are confirmed by its own manual/support page. Unavailable menus stop rather than imply an update. · Source checked 2026-11-09
  • Manufacturer-documented Bluesound NODE N132 official documentation ↗Owner’s Manual p.4 Settings — Customize Sources — Per-input Hide Source conceals an input; Auto Sense permits a detected external signal to switch the selected source. A/V mode is intended for external video sources; Compressed Grouped Audio reduces distribution network load. N132 offers IR BluOS Remote enable and per-input Auto Sense, A/V Mode, Hide Source.Exact Bluesound NODE N132 is a BluOS player. Generic BluOS app procedures are used only for documented player functions; hardware ports are confirmed by its own manual/support page. Unavailable menus stop rather than imply an update. · Source checked 2026-11-09

a1

Open BluOS Home > Settings > Player > Customize sources

Target the actual player and exact installed input.

Look for: Perform this one check and observe the actual response.

  • Manufacturer-documented Bluesound NODE N132 official documentation ↗Owner’s Manual pp.2–3: network, physical connections and controls — This exact model uses BluOS Controller, wired Ethernet to a home network and external analog/optical inputs. N132 supports external USB Audio2 DAC output selected in Audio Settings, which disables all other analog/digital outputs.Exact Bluesound NODE N132 is a BluOS player. Generic BluOS app procedures are used only for documented player functions; hardware ports are confirmed by its own manual/support page. Unavailable menus stop rather than imply an update. · Source checked 2026-11-09
  • Manufacturer-documented Bluesound NODE N132 official documentation ↗Owner’s Manual p.4 Settings — Customize Sources — Per-input Hide Source conceals an input; Auto Sense permits a detected external signal to switch the selected source. A/V mode is intended for external video sources; Compressed Grouped Audio reduces distribution network load. N132 offers IR BluOS Remote enable and per-input Auto Sense, A/V Mode, Hide Source.Exact Bluesound NODE N132 is a BluOS player. Generic BluOS app procedures are used only for documented player functions; hardware ports are confirmed by its own manual/support page. Unavailable menus stop rather than imply an update. · Source checked 2026-11-09

a2

Turn that input’s confirmed Hide Source setting off

Leave other room names and inputs unchanged.

Look for: Perform this one check and observe the actual response.

  • Manufacturer-documented Bluesound NODE N132 official documentation ↗Owner’s Manual pp.2–3: network, physical connections and controls — This exact model uses BluOS Controller, wired Ethernet to a home network and external analog/optical inputs. N132 supports external USB Audio2 DAC output selected in Audio Settings, which disables all other analog/digital outputs.Exact Bluesound NODE N132 is a BluOS player. Generic BluOS app procedures are used only for documented player functions; hardware ports are confirmed by its own manual/support page. Unavailable menus stop rather than imply an update. · Source checked 2026-11-09
  • Manufacturer-documented Bluesound NODE N132 official documentation ↗Owner’s Manual p.4 Settings — Customize Sources — Per-input Hide Source conceals an input; Auto Sense permits a detected external signal to switch the selected source. A/V mode is intended for external video sources; Compressed Grouped Audio reduces distribution network load. N132 offers IR BluOS Remote enable and per-input Auto Sense, A/V Mode, Hide Source.Exact Bluesound NODE N132 is a BluOS player. Generic BluOS app procedures are used only for documented player functions; hardware ports are confirmed by its own manual/support page. Unavailable menus stop rather than imply an update. · Source checked 2026-11-09

a3

Inspect Music > Inputs

Confirm the expected input reappears before selecting it at low volume.

Look for: Perform this one check and observe the actual response.

  • Manufacturer-documented Bluesound NODE N132 official documentation ↗Owner’s Manual pp.2–3: network, physical connections and controls — This exact model uses BluOS Controller, wired Ethernet to a home network and external analog/optical inputs. N132 supports external USB Audio2 DAC output selected in Audio Settings, which disables all other analog/digital outputs.Exact Bluesound NODE N132 is a BluOS player. Generic BluOS app procedures are used only for documented player functions; hardware ports are confirmed by its own manual/support page. Unavailable menus stop rather than imply an update. · Source checked 2026-11-09
  • Manufacturer-documented Bluesound NODE N132 official documentation ↗Owner’s Manual p.4 Settings — Customize Sources — Per-input Hide Source conceals an input; Auto Sense permits a detected external signal to switch the selected source. A/V mode is intended for external video sources; Compressed Grouped Audio reduces distribution network load. N132 offers IR BluOS Remote enable and per-input Auto Sense, A/V Mode, Hide Source.Exact Bluesound NODE N132 is a BluOS player. Generic BluOS app procedures are used only for documented player functions; hardware ports are confirmed by its own manual/support page. Unavailable menus stop rather than imply an update. · Source checked 2026-11-09

result

Check the actual result

Is the intended input visible again?

Look for: Choose only a detail you can confirm.

  • Manufacturer-documented Bluesound NODE N132 official documentation ↗Owner’s Manual pp.2–3: network, physical connections and controls — This exact model uses BluOS Controller, wired Ethernet to a home network and external analog/optical inputs. N132 supports external USB Audio2 DAC output selected in Audio Settings, which disables all other analog/digital outputs.Exact Bluesound NODE N132 is a BluOS player. Generic BluOS app procedures are used only for documented player functions; hardware ports are confirmed by its own manual/support page. Unavailable menus stop rather than imply an update. · Source checked 2026-11-09
  • Manufacturer-documented Bluesound NODE N132 official documentation ↗Owner’s Manual p.4 Settings — Customize Sources — Per-input Hide Source conceals an input; Auto Sense permits a detected external signal to switch the selected source. A/V mode is intended for external video sources; Compressed Grouped Audio reduces distribution network load. N132 offers IR BluOS Remote enable and per-input Auto Sense, A/V Mode, Hide Source.Exact Bluesound NODE N132 is a BluOS player. Generic BluOS app procedures are used only for documented player functions; hardware ports are confirmed by its own manual/support page. Unavailable menus stop rather than imply an update. · Source checked 2026-11-09

Possible result

Confirm the unknown detail first

Do not infer a source setting, installed cartridge, connector role, software state or partner capability. Obtain the exact documentation before continuing.

insufficient data

Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

    Possible result

    Keep the actual observation for support

    Record the exact model, source, input and last observed response. These checks do not diagnose a failed component. No reset, service work or blind update is prescribed.

    next support

    Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

      Possible result

      Checks completed — keep the observed result

      This records the observation in this particular setup, not a guaranteed cure, physical Audio Review test or measurement.

      steps completed

      Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

        All Audio Fix guides → · TV & Audio Finder →

        Scroll to Top