Audio Fix / setup help
Audient EVO 4: select the connected EVO4 for an existing recording application
Audient EVO 4: select the connected EVO4 for an existing recording application. Check prerequisites and the actual response before reporting an outcome.
Manufacturer-documented Reviewed 2026-11-09 · Revision 1
Follow these checks in Audio Fix →When this guide applies
Compatible host, installed required driver and a known hardware input signal.
Connection scope: USB audio. Symptom: Recording or direct monitoring is not working.
This is a documented check, not a diagnosis of your equipment. The model name does not confirm the selected input, mode, software or connected partner.
If your exact model or a required setting is unknown, use the “I don’t know” branch below. Do not apply a similarly named model’s instructions.
Checks and possible outcomes
Start at step-0. Follow the link that matches what you actually observe. Alternative branches are not a single sequence of actions.
step-0
Is EVO4 recognised by the supported host with its required driver installed?
An unknown or unsupported host needs its exact compatibility documentation.
Look for: Confirm the actual prerequisite or observation. Unknown stops safely.
- If Yes / check completed → Is the intended source visible on the EVO input meter?
- If No / cannot confirm → Keep these observations for official support
- If I do not know / cannot check → A required fact is unknown
- Manufacturer-documented EVO 4 Getting Started | Audient Documentation ↗Getting Started — Use a suitable USB data cable, low listening levels, and select EVO4 as host/app input and output. Windows needs the correct installed driver; do not assume a generic USB-C cable carries data.Exact model named in the retrieved manufacturer document header. · Source checked 2026-11-09
step-1
Is the intended source visible on the EVO input meter?
Host selection cannot create a missing hardware input signal.
Look for: Confirm the actual prerequisite or observation. Unknown stops safely.
- If Yes / check completed → May the app recording device change while stopped?
- If No / cannot confirm → Keep these observations for official support
- If I do not know / cannot check → A required fact is unknown
- Manufacturer-documented EVO 4 Getting Started | Audient Documentation ↗Getting Started — Use a suitable USB data cable, low listening levels, and select EVO4 as host/app input and output. Windows needs the correct installed driver; do not assume a generic USB-C cable carries data.Exact model named in the retrieved manufacturer document header. · Source checked 2026-11-09
step-2
May the app recording device change while stopped?
Save the current audio settings; do not interrupt an active take.
Look for: Confirm the actual prerequisite or observation. Unknown stops safely.
- If Yes / check completed → Select EVO4 as the app input and output device
- If No / cannot confirm → Keep these observations for official support
- If I do not know / cannot check → A required fact is unknown
- Manufacturer-documented EVO 4 Getting Started | Audient Documentation ↗Getting Started — Use a suitable USB data cable, low listening levels, and select EVO4 as host/app input and output. Windows needs the correct installed driver; do not assume a generic USB-C cable carries data.Exact model named in the retrieved manufacturer document header. · Source checked 2026-11-09
step-3
Select EVO4 as the app input and output device
Use the intended numbered input on the recording track, not a generic stereo or unrelated built-in microphone.
Look for: Perform only the stated operation, then confirm whether it could be completed.
- If Yes / check completed → Does that track meter show the known source?
- If No / cannot confirm → Keep these observations for official support
- If I do not know / cannot check → A required fact is unknown
- Manufacturer-documented EVO 4 Getting Started | Audient Documentation ↗Getting Started — Use a suitable USB data cable, low listening levels, and select EVO4 as host/app input and output. Windows needs the correct installed driver; do not assume a generic USB-C cable carries data.Exact model named in the retrieved manufacturer document header. · Source checked 2026-11-09
step-4
Does that track meter show the known source?
Direct monitoring alone is not proof of which input the app records.
Look for: Confirm the actual prerequisite or observation. Unknown stops safely.
- If Yes / check completed → Checks completed — report what happened
- If No / cannot confirm → Keep these observations for official support
- If I do not know / cannot check → A required fact is unknown
- Manufacturer-documented EVO 4 Getting Started | Audient Documentation ↗Getting Started — Use a suitable USB data cable, low listening levels, and select EVO4 as host/app input and output. Windows needs the correct installed driver; do not assume a generic USB-C cable carries data.Exact model named in the retrieved manufacturer document header. · Source checked 2026-11-09
Possible result
Checks completed — report what happened
Completion is not an automatic solved result. Report solved, partly helped, did not help or could not follow based on your actual observation. No Audio Review physical test is claimed.
steps completed
Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.
Possible result
Keep these observations for official support
A required prerequisite or response was not confirmed. Stop this sequence and use the exact model and partner documentation. Do not escalate to a factory reset, firmware installation, internal repair or unsafe wiring change.
next support
Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.
Possible result
A required fact is unknown
Confirm the exact model, connection, partner capability and current control state before continuing. Do not guess settings or operate an updating product.
insufficient data
Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.