Audio Fix / setup help

NAD C 700 V2: Read the amplifier network address when absent from the app

Use this exact amplifier front menu for a read-only current IP Address observation.

Manufacturer-documented Reviewed 2026-11-09 · Revision 1

Follow these checks in Audio Fix →

When this guide applies

Exact C 700 V2 already configured, normal front display operating. No onboarding, network changes, reset or public disclosure of IP/MAC details.

Connection scope: Wi-Fi / Ethernet network audio. Symptom: Network audio setup is not working.

This is a documented check, not a diagnosis of your equipment. The model name does not confirm the selected input, mode, software or connected partner.

If your exact model or a required setting is unknown, use the “I don’t know” branch below. Do not apply a similarly named model’s instructions.

Checks and possible outcomes

Start at scope. Follow the link that matches what you actually observe. Alternative branches are not a single sequence of actions.

scope

Confirm the exact setup

Is this already configured C 700 V2 absent from the controller, with its normal front display and VOLUME-MENU navigation operating?

Look for: Choose only a detail you can confirm.

  • Manufacturer-documented NAD C 700 V2 Owner’s Manual EN-13 ↗Front setup navigation, PDF p11; About, p14 — Hold VOLUME-MENU for setup; rotate/select menu items and press to enter. Settings > About displays current IP Address and Ethernet/Wi-Fi MAC addresses.Exact C 700 V2 front menu; read-only network-state observation, not proof of internet connectivity. · Source checked 2026-11-09

a1

Open the front setup menu

Hold VOLUME-MENU until Sources, My Presets and Settings appear. Do not rotate the knob as a listening-volume workaround.

Look for: Perform this one check and observe the actual response.

  • Manufacturer-documented NAD C 700 V2 Owner’s Manual EN-13 ↗Front setup navigation, PDF p11; About, p14 — Hold VOLUME-MENU for setup; rotate/select menu items and press to enter. Settings > About displays current IP Address and Ethernet/Wi-Fi MAC addresses.Exact C 700 V2 front menu; read-only network-state observation, not proof of internet connectivity. · Source checked 2026-11-09

a2

Enter Settings

Rotate to Settings and press VOLUME-MENU to select it.

Look for: Perform this one check and observe the actual response.

  • Manufacturer-documented NAD C 700 V2 Owner’s Manual EN-13 ↗Front setup navigation, PDF p11; About, p14 — Hold VOLUME-MENU for setup; rotate/select menu items and press to enter. Settings > About displays current IP Address and Ethernet/Wi-Fi MAC addresses.Exact C 700 V2 front menu; read-only network-state observation, not proof of internet connectivity. · Source checked 2026-11-09

a3

Open About

Navigate to About using the documented rotate/select controls. Do not select a reset or network-setup command.

Look for: Perform this one check and observe the actual response.

  • Manufacturer-documented NAD C 700 V2 Owner’s Manual EN-13 ↗Front setup navigation, PDF p11; About, p14 — Hold VOLUME-MENU for setup; rotate/select menu items and press to enter. Settings > About displays current IP Address and Ethernet/Wi-Fi MAC addresses.Exact C 700 V2 front menu; read-only network-state observation, not proof of internet connectivity. · Source checked 2026-11-09

result

Check the actual result

Is a current IP Address actually displayed? Read privately, and do not infer a working link from a MAC address alone.

Look for: Choose only a detail you can confirm.

  • Manufacturer-documented NAD C 700 V2 Owner’s Manual EN-13 ↗Front setup navigation, PDF p11; About, p14 — Hold VOLUME-MENU for setup; rotate/select menu items and press to enter. Settings > About displays current IP Address and Ethernet/Wi-Fi MAC addresses.Exact C 700 V2 front menu; read-only network-state observation, not proof of internet connectivity. · Source checked 2026-11-09

Possible result

Confirm the unknown detail before proceeding

Stop rather than infer an installed cartridge, partner, source level, cable capability, software version or control state.

insufficient data

Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

    Possible result

    Keep the actual observation for support

    Record the exact model, source, connection, control state and response. These checks do not diagnose a failed component or prescribe a reset, update, internal repair or mains change.

    next support

    Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

      Possible result

      Keep the observed result

      This is the outcome observed in this setup, not a guaranteed cure, Audio Review physical test or measurement.

      steps completed

      Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

        All Audio Fix guides → · TV & Audio Finder →

        Scroll to Top