Audio Fix / setup help

Marshall Middleton II: join the documented Heddon Listen to Broadcast beta

join the documented Heddon Listen to Broadcast beta. Use the stated exact hardware and connection scope.

Manufacturer-documented Reviewed 2026-11-09 · Revision 1

Follow these checks in Audio Fix →

When this guide applies

Exact Marshall Middleton II. Exact Middleton II is powered with its official app connected by LE. The owner already deliberately completed manufacturer preparation: ordinary phone audio record removed, LE retained, and accepts needing ordinary audio pairing again later. A configured Heddon and its serial digits are identified; Listen to Broadcast(beta) is offered. No call/update is active and both owners accept shared music.

Connection scope: Bluetooth. Symptom: Stereo or party speaker linking isn’t working.

This is a documented check, not a diagnosis of your equipment. The model name does not confirm the selected input, mode, software or connected partner.

If your exact model or a required setting is unknown, use the “I don’t know” branch below. Do not apply a similarly named model’s instructions.

Checks and possible outcomes

Start at scope. Follow the link that matches what you actually observe. Alternative branches are not a single sequence of actions.

scope

Confirm the model and connection

Exact Middleton II is powered with its official app connected by LE. The owner already deliberately completed manufacturer preparation: ordinary phone audio record removed, LE retained, and accepts needing ordinary audio pairing again later. A configured Heddon and its serial digits are identified; Listen to Broadcast(beta) is offered. No call/update is active and both owners accept shared music.

Look for: Confirm this exact setup and observation before continuing.

  • Manufacturer-documented Marshall Middleton II — official middleton2 broadcast beta ↗Listen to broadcast9–38; exact compatibility list — Middleton II can temporarily join a Heddon broadcast using Listen to Broadcast(beta). Its documented preparation retains the LE phone connection and removes the ordinary audio entry; the broadcast password uses the last four Heddon serial digits. Selection repeats each session.Exact Marshall Middleton II. · Source checked 2026-11-09

a1

Start the existing Heddon source quietly

On the already-configured Heddon start familiar music at a quiet level. Keep its stable placement and existing wiring unchanged.

Look for: Observe the named indication or available control; stop if absent.

  • Manufacturer-documented Marshall Middleton II — official middleton2 broadcast beta ↗Listen to broadcast9–38; exact compatibility list — Middleton II can temporarily join a Heddon broadcast using Listen to Broadcast(beta). Its documented preparation retains the LE phone connection and removes the ordinary audio entry; the broadcast password uses the last four Heddon serial digits. Selection repeats each session.Exact Marshall Middleton II. · Source checked 2026-11-09

a2

Open the available broadcast screen

In the already-connected Marshall Bluetooth app open Listen to Broadcast(beta). Stop if absent; do not start an update.

Look for: Observe the named indication or available control; stop if absent.

  • Manufacturer-documented Marshall Middleton II — official middleton2 broadcast beta ↗Listen to broadcast9–38; exact compatibility list — Middleton II can temporarily join a Heddon broadcast using Listen to Broadcast(beta). Its documented preparation retains the LE phone connection and removes the ordinary audio entry; the broadcast password uses the last four Heddon serial digits. Selection repeats each session.Exact Marshall Middleton II. · Source checked 2026-11-09

a3

Select the exact Heddon broadcast

Choose your identified Heddon broadcast, not an unknown nearby broadcast.

Look for: Observe the named indication or available control; stop if absent.

  • Manufacturer-documented Marshall Middleton II — official middleton2 broadcast beta ↗Listen to broadcast9–38; exact compatibility list — Middleton II can temporarily join a Heddon broadcast using Listen to Broadcast(beta). Its documented preparation retains the LE phone connection and removes the ordinary audio entry; the broadcast password uses the last four Heddon serial digits. Selection repeats each session.Exact Marshall Middleton II. · Source checked 2026-11-09

a4

Enter the known broadcast password

When requested, enter the last four Heddon serial digits already recorded from its label or About page. Do not lift or disconnect a playing device to inspect it.

Look for: Observe the named indication or available control; stop if absent.

  • Manufacturer-documented Marshall Middleton II — official middleton2 broadcast beta ↗Listen to broadcast9–38; exact compatibility list — Middleton II can temporarily join a Heddon broadcast using Listen to Broadcast(beta). Its documented preparation retains the LE phone connection and removes the ordinary audio entry; the broadcast password uses the last four Heddon serial digits. Selection repeats each session.Exact Marshall Middleton II. · Source checked 2026-11-09

observe

Check the result

Does the identified Heddon broadcast play through Middleton II? This beta connection needs selecting again in a later session.

Look for: Confirm this exact setup and observation before continuing.

  • Manufacturer-documented Marshall Middleton II — official middleton2 broadcast beta ↗Listen to broadcast9–38; exact compatibility list — Middleton II can temporarily join a Heddon broadcast using Listen to Broadcast(beta). Its documented preparation retains the LE phone connection and removes the ordinary audio entry; the broadcast password uses the last four Heddon serial digits. Selection repeats each session.Exact Marshall Middleton II. · Source checked 2026-11-09

Possible result

More information is required

An unknown state is not a diagnosis. Record the last visible indication and consult the exact model instructions.

insufficient data

Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

    Possible result

    Continue with source and model support

    Keep the source, connection and last observation. Do not reset, open equipment or change full-scale output to compensate for an unconfirmed result.

    next support

    Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

      Possible result

      Checks completed

      The requested observation was confirmed in this setup. It does not establish a hardware repair or guarantee another source behaves the same.

      steps completed

      Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.

        All Audio Fix guides → · TV & Audio Finder →

        Scroll to Top