Audio Fix / setup help
Anker Soundcore Space One Pro: enable Side Tone for self-voice monitoring
Anker Soundcore Space One Pro — enable Side Tone for self-voice monitoring. Follow the exact-model instructions and confirm the result.
Manufacturer-documented Reviewed 2026-11-09 · Revision 1
Follow these checks in Audio Fix →When this guide applies
Exact Anker Soundcore Space One Pro with a Bluetooth source. The call works but you cannot comfortably hear your own voice. Side Tone is local monitoring, not microphone unmute. Reversible checks only; no factory reset or pairing-list deletion.
Connection scope: Bluetooth. Symptom: Sound changes during calls.
This is a documented check, not a diagnosis of your equipment. The model name does not confirm the selected input, mode, software or connected partner.
If your exact model or a required setting is unknown, use the “I don’t know” branch below. Do not apply a similarly named model’s instructions.
Checks and possible outcomes
Start at scope. Follow the link that matches what you actually observe. Alternative branches are not a single sequence of actions.
scope
Confirm the setup
The call works but you cannot comfortably hear your own voice. Side Tone is local monitoring, not microphone unmute.
Look for: Confirm this setup before changing anything.
- If This describes my setup → Open the model settings
- If My setup differs → Use model and source support
- If I do not know / cannot check → More information is needed
- Manufacturer-documented Anker Soundcore Space One Pro official instructions ↗Audio/call controls; LED indications; dry charging; Side Tone — Short volume presses, play/pause, two-second call mute, red charging/off full indication and app Side Tone are documented.Exact Anker Soundcore Space One Pro. A3062 SpaceOnePro only. Media EQ is explicitly not a call-quality control. · Source checked 2026-11-09
a1
Open the model settings
Open Space One Pro in the soundcore app.
Look for: Observe the stated control or indication.
- If I completed this check → Open More Settings
- If I could not complete it → Use model and source support
- If I do not know / cannot check → More information is needed
- Manufacturer-documented Anker Soundcore Space One Pro official instructions ↗Audio/call controls; LED indications; dry charging; Side Tone — Short volume presses, play/pause, two-second call mute, red charging/off full indication and app Side Tone are documented.Exact Anker Soundcore Space One Pro. A3062 SpaceOnePro only. Media EQ is explicitly not a call-quality control. · Source checked 2026-11-09
a2
Open More Settings
Select More Settings.
Look for: Observe the stated control or indication.
- If I completed this check → Enable Side Tone
- If I could not complete it → Use model and source support
- If I do not know / cannot check → More information is needed
- Manufacturer-documented Anker Soundcore Space One Pro official instructions ↗Audio/call controls; LED indications; dry charging; Side Tone — Short volume presses, play/pause, two-second call mute, red charging/off full indication and app Side Tone are documented.Exact Anker Soundcore Space One Pro. A3062 SpaceOnePro only. Media EQ is explicitly not a call-quality control. · Source checked 2026-11-09
a3
Enable Side Tone
Turn Side Tone on for the active Bluetooth call comparison.
Look for: Observe the stated control or indication.
- If I completed this check → Check the result
- If I could not complete it → Use model and source support
- If I do not know / cannot check → More information is needed
- Manufacturer-documented Anker Soundcore Space One Pro official instructions ↗Audio/call controls; LED indications; dry charging; Side Tone — Short volume presses, play/pause, two-second call mute, red charging/off full indication and app Side Tone are documented.Exact Anker Soundcore Space One Pro. A3062 SpaceOnePro only. Media EQ is explicitly not a call-quality control. · Source checked 2026-11-09
observe
Check the result
Is your own voice audible at the intended monitoring level?
Look for: Report the observation; completing steps does not establish a repair.
- If The expected result is present → Checks completed
- If The problem remains → Use model and source support
- If I do not know / cannot check → More information is needed
- Manufacturer-documented Anker Soundcore Space One Pro official instructions ↗Audio/call controls; LED indications; dry charging; Side Tone — Short volume presses, play/pause, two-second call mute, red charging/off full indication and app Side Tone are documented.Exact Anker Soundcore Space One Pro. A3062 SpaceOnePro only. Media EQ is explicitly not a call-quality control. · Source checked 2026-11-09
Possible result
More information is needed
No diagnosis follows from an unknown answer. Record the last visible indication and consult the exact-model instructions or support.
insufficient data
Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.
Possible result
Use model and source support
Keep the symptom and last observed step. Do not clear pairings or reset settings on the basis of this guide.
next support
Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.
Possible result
Checks completed
You confirmed the requested observation in this setup. This is not a laboratory test or a promise about other apps and sources.
steps completed
Reaching this result does not mean the issue is solved. Only your own feedback can report improvement.